20 Best Dremel Bit For Cutting Metal (2023 Updated)

When you’ve got renovation or construction projects on the go it always pays off to have the right tools for the job. Dremel has what you need with this Multipurpose Cutting Bit. This drill bit is great for all kinds of jobs, both big and small whether you’re at home or on the job site.

This multipurpose bit is 1/8” wide and is made for cutting so that you’ve always got a fresh bit to change out to when you’re working on big renovations or small jobs needing a dremel tool. Continue a legacy of quality by using Dremel products.

The only substance harder than tungsten carbide is diamond. Dremel tungsten carbide Cutters are ideal for shaping, smoothing or removing material from especially hard substances, like cast iron, nonferrous metals, and hard woods.

The 1/8-inch tungsten carbide cutter can be used in virtually any Dremel rotary tool.

Shapes smooths or grinds especially hard materials including hardened steel stainless steel cast iron nonferrous metals fired ceramics plastics and hard woods. A high-speed bit made of tungsten carbide the hardest material next to diamonds.

Great for shaping those hard to work with materials. Made from quality carbide steel.

For your next home improvement project use the Dremel 9903 Tungsten Carbide Cutter. It shapes, smooths and grinds especially hard materials, such as hardened or stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

The Dremel metal cutting bit can also be used to remove material from other items. It is a high-speed cutter made of tungsten carbide, which is the hardest material next to diamonds. It is recommended to use slower speeds for plastics and faster speeds for hard woods.

It is best to use the sides of the bit for effective cutting.

This is a versatile, high-quality cutter made of high-grade steel for use on wood, plastic and soft metals. It’s ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes. Use the sides of the cutter for effective cutting and higher speeds on hard woods and very slow speeds on plastics.

These reinforced cut-off wheels last up to two times longer than typical fiberglass wheels. These wheels can be used for cutting metal conduit and PVC piping, reslotting screw heads, and removing rusty nail heads.

The EZ Lock design makes changing accessories as easy as a pull, twist, and release, with no worry of losing a screw or needing a wrench. This pack includes five cut-off wheels. 1-1/2″ diameter. Item dimensions: 1″ L x 2″ W x 4.

3″ H.

Dremel 9911 Specifications Dremel 9911 Features Model Number: 9911. Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. Use the sides of the cutter (rather than the tip) for effective cutting.

10 Piece Set of High Speed Steel (HSS) Cutting Burs; 10 Different Shapes and Sizes; Fits Dremel Tool These Are Super High Quality M2 HSS Burrs; They Stay Sharp Longer Than the Cheap, Lower Quality Burs Great For Woodworking and Engraving; Works on Metal, Stone, Wood, Plastic, Fiberglass, and Porcelain Made for Cutting Engraving Carving Grinding Notching Grooving Milling Cnc; M2 High Speed Cutter Bits 1/8 inch Shank; Fits Rotary Tool, Drill, 1/8 inch Die Grinder; Single Cut Burrs; Router Routing Bits This is a 10 piece set of M2 high speed steel (HSS) metal cutting burrs.

This 10pc burr set includes all of the most popular burrs shapes and sizes for cutting, carving, engraving, notching, grinding, grooving, routing, cnc milling, and more. /br /br Single cut burr set – metal cutting / grinding and woodworking router bits.

1/8″ shank – fits dremel rotary tool, corded and cordless drill, and 1/8″ die grinders. /br /br Comes in Jenoco Branded Retail Packaging; These HSS router bits / burrs are a Genuine Jenoco Brand Product.

/br /br These metal cutter burr bits can be used on all types of metal, wood, stone, porcelain, sheet metal, plastic, fiberglass, and more. They are great for engraving, wood working, cutting, grinding, deburring, reaming, and much more.

/br /br These solid high speed steel routing bits / burs are tough. Each of the high speed cutter bur bits in this set have a 3mm standard 1/8″ shank, which fits dremel tool, 1/8″ die grinder, corded and electric drill.

/br /br This 10 pc set of rotary tool burrs has 10 different shapes and sizes of burs, including the popular ball shape, cylinder shape, round shape, pointed shape, cone shape, oval shape, and flame shape.

/br /br All of the rotary tool bur bits in this kit are all single cut burr bits. Single flute HSS burrs cut through material very quickly. Made out of high quality M2 HSS carbon steel. These metal grinding burr bits make fast, clean cuts.

/br /br These small HSS metal cutter burr bits are durable. Made out of industrial grade solid M2 HSS. Multiple shaped bur bit rasps make it easy to cut or notch many different sizes, or engrave any words or any types of designs.

/br /br /br BURR BIT SPECIFICATIONS: /br /br Shank Diameter: 1/8″ /br Shank Length: 0. 85″ /br Total Bit Length: 1. 6″ /br Burr Diameters: Multiple Sizes.

Turn your Dremel rotary tool into a powerful cutting machine with the EZ Lock Starter Kit. The cut-off wheels are designed to last 2X longer compared to the 426. (1. 1mm) thick blade making it ideal to cut, groove, and trim all types of metal including hardened steel.

Perfect for projects like cutting bolt heads, reslotting damaged screws, cutting sheet metal, or trimming metal rods. The cutting discs are also ideal for delicate woodworking projects and can be used on other materials including wood, plastics or ceramics.

The wheels are designed with the patented EZ Lock system making accessory changes quick and easy.

Get a 15/16-inch diameter cut-off wheel made of a hard abrasive material that’s used for slicing and cutting metal, including hardened steel. Our cut-off wheel makes it easy to cut bolts or screws, or make slots in rusted or stripped bolts and screws to allow for easy removal with a screwdriver.

Pack of 20 wheels.

The Dremel bit is made of strong and durable steel for shaping, hollowing and more. It can be used in soft metals, plastics and woods.

Turn your Dremel rotary tool into a powerful cutting machine with EZ Lock Fiberglass Reinforced Cut-Off Wheels. The EZ456B includes 12 fiberglass reinforced cut-off wheels designed to last 2X longer compared to the 426.

(38. 1 mm) wheel diameter and 0. 045 In. (1. 1mm) thick blade making it ideal to cut, groove, and trim all types of metal including hardened steel. Perfect for projects like cutting bolt heads, reslotting damaged screws, cutting sheet metal, or trimming metal rods.

The cutting discs are also ideal for delicate woodworking projects and can be used on other materials including wood, plastics or ceramics. The wheels are designed with the patented EZ Lock system making accessory changes quick and easy.

For use with the EZ402 EZ Lock mandrel only.

Includes (1) Cutting Blade. New, Bulk Packed. Patented EZ-Lock system for quick and easy accessory changes. 2X more cuts compared to 409 cut-off wheel. Ideal for thin-kerf cuts in a variety of materials including hard metals like steel, metal pipes or sheet metal.

Reinforced with fiberglass for increased durability. Compatible with the Following: Dremel: 4000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 780,300,8220.

A high-speed cutter made of tungsten carbide, the hardest material next to diamonds, 1/8″ (3,2mm) shank. Ideal for shaping, smoothing or removing material from especially hard materials–including hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

The Dremel bit is made of steel that can handle high speeds. It is great for use on wood, plastic and soft metals.

Dremel 196 high speed cutter. A versatile, high-quality cutter made of high-grade steel for use on wood, plastic and soft metals. Two cutters per package.

Dremel universal oscillating accessories are the first truly universal oscillating accessories available that require no adapter. The unique dual interface fits all competitive Oscillating Tool, including those with a quick change feature.

The Dremel MM485U universal carbide flush cut blade has high-performance carbide teeth designed to cut hard and abrasive materials like nails, screws, stainless steel bolts, galvanized pipe, plaster & lathe, cement board, fiber board, sheet metal, slate, ceramic tile and more! Its wide 1-1/4 In.

blade speeds through long cuts and can make plunge cuts up to 1-11/16 In. deep.

SpeedClic Cutting Wheels Set – Accessory Kit with 10 Rotary Tool Cutting DiscsnnSummarynn–Dremel cutting accessory set SC690 contains an assortment of 10 EZ SpeedClic cutting wheels and 1 mandrel in a convenient storage casenn–10 rotary tool cutt-off wheels for cutting in a variety of material such as metal, steel, brick, marble, copper, aluminium, brass, plastic and morenn–The Dremel SpeedClic system allows for quick, easy and keyless changing of accessoriesnn–In reusable case to provide a convenient storage solutionnn–Included: 10x EZ SpeedClic Cutting Wheels 6x Metal Cutting Wheel, 2x Thin Metal Cutting Wheel, 2x Plastic Cutting Wheel, 1x EZ SpeedClic MandrelnnDescriptionnnAssortment of 10 EZ SpeedClic cutting wheels and the special EZ SpeedClic mandrel.

Besides 6 regular 38 mm metal cutting wheels the kit includes 2 special thin cutting wheels and 2 unique plastic cutting wheels. EZ SpeedClic is the unique quick-change system for rotary tool accessories.

Turn your Dremel rotary tool into a powerful cutting machine with the EZ Lock Thin Cut-Off Wheels. The EZ409 includes 5 fiberglass reinforced cut-off wheels designed to last 2X longer compared to the 409.

The highly-durable cut-off wheels feature a 1-1/2 In. (38. 1 mm) wheel diameter and 0. 025 In. (0. 6 mm) thick blade making it ideal to cut, groove, and trim all types of metal including hardened steel.

Best for tougher applications and for projects like cutting bolt heads, reslotting damaged screws, cutting sheet metal, or trimming metal rods. The cutting discs are also ideal for delicate woodworking projects and can be used on other materials including wood, plastics or ceramics.

The wheels are designed with the patented EZ Lock system making accessory changes quick and easy. For use with the EZ402 EZ Lock mandrel only.

The Dremel engraver multipack provides small, ball-shaped 0. 8mm engraving cutters. They are great for very detailed carving and engraving on materials such as wood and soft metals. Made for intricate work on ceramics, wood carvings, jewellery and scrimshaw.

They often are used in making complicated printed circuit boards. They should not be used on steel and other very hard materials.