When you shop through links on our site, we may earn an affiliate commission. This educational content is not intended to be a substitute for professional advice.
Wall anchors are used to secure a structure to a concrete block wall. The most common type of wall anchor is a expanding anchor, which is inserted into a drilled hole and then expanded with a tool to create a secure hold.
20 Best Wall Anchors For Concrete Block
Product Image
Product Name
Features
Price
CONFAST 3/16" x 2-3/4" Flat Phillips Concrete Screw Anchor with Drill Bit (100 …
BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
FLAT PHILLIPS HEAD–Can be driven with Phillips Screw Driver
Applications the anchor is made from carbon steel, and is blue. This anchor is designed for use in concrete, block, and brick. Environment the anchor is designed for use in a dry environment. Head style the anchor is a flat countersunk phillips head and is designed to prevent the head from protruding above the surface of the item being attached.
Hole diameter/bit diameter the anchor requires a 5/32in hole to be drilled in the base material concrete, block, and brick. The hole should be drilled with carbide tipped bit that meets ansi standards and used in a hammer drill.
Driver required a 2 is required for driving the anchor into the base material. Diameter of anchor the diameter of the anchor is 3/16in. Length anchor the length of the anchor is 2-3/4in thread length the length of the threads on the anchor is 1-3/4in in length.
Minimum embedment the minimum anchor embedment into the concrete is 1in. Therefore, the anchor must be installed so that a minimum of 1in of the anchor is embedded into the concrete. Maximum fixture thickness the maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/4in to 1-3/4in.
This will ensure that the minimum embedment of 1in will be met. Fixture hole diameter the hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/16in diameter anchor requires the hole in the fixture to be 1/4in.
Spacing between anchors each anchor must be spaced a minimum distance of 3in from each other when measured center to center. Edge distance it is very important not to install the anchor any closer than 2-1/4in from an unsupported edge of the concrete.
My husband is very happy with this purchase. He is very happy to find this company also for future use for not only himself but his friends also!! Thanks again for all the help in ordering and fast service!!.
These are as good as the competition at a great price! I have used these over the years and always have good results. I am an avid long time user of concrete fasteners and recommend these.
The Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions.
The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. This heat-treated anchor undercuts the concrete to create a strong mechanical interlock over the entire length of the anchor.
The anchor can be installed with a standard ANSI tolerance drill bit and is removeable. Recommended for permanent dry, non-corrosive applications or temporary outdoor applications.
This is my first opportunity to do business with Fasteners Plus, the service was great, I will of course do business with them in the future. The product, 3/8, 316 stainless concrete screw anchor was over the top.
I wish I would have known about these fasteners before, they exceed anything I’ve used in the past. Just an outstanding experience all the way.
Applications The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick. Environment The anchor is designed for use in a Dry environment. Head Style The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.
Hole Diameter/Bit Diameter The anchor requires a 3/8″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor The diameter of the anchor is 3/8″. Length Anchor The length of the anchor is 3″ Minimum Embedment The minimum anchor embedment into the concrete is 1-1/4″. Therefore, the anchor must be installed so that a minimum of 1-1/4″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-3/4″. This will ensure that the minimum embedment of 1-1/4″ will be met.
Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8″ diameter anchor requires the hole in the fixture to be 1/2″.
Spacing between Anchors Each anchor must be spaced a minimum distance of 3-3/4″ from each other when measured center to center. Edge Distance It is very important not to install the anchor any closer than 1-7/8″ from an unsupported edge of the concrete.
The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry.
The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
The Tapcon 5/16 inch x 2-1/4 inch steel hex-head indoor/outdoor concrete anchors are ideal for use in fastening applications that require a high performance anchor. The anchors are suitable for use in concrete whether indoors or outdoors.
Large diameter Tapcon anchors install in less than half the time of wedge anchors or adhesive anchors. Simply drill a pilot hole and drive the LDT anchor by hand or impact.
Installation Instructions: Easy to install. 1. Drill. 2. Drive. See detailed installation instructions on inside panel. For best results use – hammer drill; Tapcon drill bit; impact or manual wrench. 5/16 in anchor diameter; 1/4 in drill bit; 3/8 in hex nut driver.
Reviews From Real Customers
Having threads the entire length worked great for anchoring metal shelves to concrete wall.
Red Head Trubolt wedge anchors are proudly made in the USA. The zinc plated model is designed to be installed in non-corrosive interior environments. All Red Head Trubolt wedge anchors have the exposed end of the anchor stamped for easy length identification once installed.
Anchoring cement interior/exterior pail size 10 pounds Pourable, used for setting bolts, handrails, or anchoring anything metal in concrete, and for repairing loose wrought iron railings. Activated with water, expands as it hardens.
Worked well. I wasnt sure if it would be premixed or not and I couldnt find anything out online. Inside the plastic bucket is a plastic bag with the cement powder in it. You need to mix the powder with water in a separate container, then apply.
If you have a large job to do you’d be better to buy a big bag of the mix. Instructions are printed on the side and were smudged and bit difficult to read. But just add a little bit of water at a time to the consistency you want, then apply.
Good product. It wasn’t as “quick” as I expected but hardened nicely after a day and cured after a couple. I repaired a broken corner on my septic tank lid so it was about 3 inches thick. I added some gravel as they suggested.
The Titen HD anchor is a high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete. The high-strength, easy-to-install Titen HD anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions.
The self-undercutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.
Applications the anchor is made from grade 10b21 saej403, astm b633, and is zinc plated. This anchor is designed for use in concrete and grout filled cmuenvironment the anchor is designed for use in a dry environment.
Head style the anchor is a hex washer serrated head and is designed to allow the head to sit on top of the surface of the item being attached. Hole diameter/bit diameter the anchor requires a 3/8in hole to be drilled in the base material concrete and grout filled cmu.
The hole should be drilled with carbide tipped bit that meets ansi standards and used in a hammer drill. Driver required a 9/16in is required for driving the anchor into the base material. Diameter of anchor the diameter of the anchor is 3/8in.
Length anchor the length of the anchor is 6in thread length the length of the threads on the anchor is in length. Minimum embedment the minimum anchor embedment into the concrete is. Therefore, the anchor must be installed so that a minimum of of the anchor is embedded into the concrete.
Maximum fixture thickness the maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is. This will ensure that the minimum embedment of will be met. Fixture hole diameter the hole in the fixture or material being fastened must be larger than the designated diameter of the anchor.
The 3/8in diameter anchor requires the hole in the fixture to be 9/16in. Spacing between anchors each anchor must be spaced a minimum distance of 3in from each other when measured center to center. Edge distance it is very important not to install the anchor any closer than 1-3/4in from an unsupported edge of the concrete.
Hillman Plastic Ribbed Anchors with Screws work with various diameter sheet metal screws, Ideal for anchoring in concrete, brick or wallboard, The anchor is corrosion resistant and pre-drilling is required, Available in a variety of sizes.
For use in drywall, plaster, brick, concrete and block
Weight Capacity
15 lbs
Color Family
Greens
Reviews From Real Customers
I used these for L hooks that were a little bit bigger and they worked well. I do find that the suggested drill size makes the hole a little bit too big and would use a smaller drill bit next time. Lastly they were out of stock of just the anchors so I had to purchase the package with screws so now I have extra screws, not a big deal just make sure you know what you need.
The buyer must inform us by email at Please use e – Bay messaging system the intention to withdraw within 10 working days of receipt of the goods. 5 Legislative Decree 185/1999, the distance selling regulations the purchaser has the right to terminate the contract for any reason.
Can evaluate the popularity of our service and allow us to constantly improve the quality and efficiency of orders. ATTENTION! Complaints about material damage caused by the carrier not signed with the Apostille cannot be solved.
For administrative problems you cannot bill you on a date that is different from the receipt, which is always played at checkout. For this service please contact constringre and accessories directly with the courier who has been entrusted with the shipment.
Couriers deliver the door and not on the floor. It is compulsory open items no later than 3 days after receiving the order (natural and consecutive), to verify that the order is complete and products are reliable.
Failure to provide the motivation could lead to legal challenges and delays. Within three days of non-acceptance of the neck you must send an email to Please use e – Bay messaging system, telling us that you refused the neck indicating its motivation.
If you refuse the package because broken in vista, if you can write upon receipt of courier entering compulsory (although the courier does not recommend) the motivation “broken neck”.
Anchor body with expanding SLM with hook The anchor expansion for non-structural applications in non-cracked concrete. * Version with hook. Suitable for: * Concrete C12 / 15 to C50 / 60, uncracked * Natural stone with compact Advantages: * The body in two sectors causes a wide and uniform distribution of the load, even on compact of poor quality materials.
* The internal metric thread allows the use of standard screws and threaded rods for an ideal adaptation to the application. * The red plastic cap protects the thread from the drilling dust, thereby ensuring a correct operation.
Applications: * Banister * Handrail * Console * Gates * Railings * Spaced Installations Function: * SLM is suitable for non-pass-through installation. * When applying the tightening torque, the cone is invoked in the body of the anchor, which expands against the wall of the hole.
* For a correct installation, the hook must be contrasted with washer and nut. * To determine the length of the screw ls:Screw length ls = Fixing length + Thickness object to be fixed tfix + Washer thickness.
Applications The anchor is made from Carbon Steel, and is Blue Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick. Environment The anchor is designed for use in a Dry to Moist environment.
Head Style The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached. Hole Diameter/Bit Diameter The anchor requires a 5/32″ hole to be drilled in the base material (Concrete, Block, and Brick).
The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Driver Required A 1/4″ is required for driving the anchor into the base material. Diameter of Anchor The diameter of the anchor is 3/16″.
Length Anchor The length of the anchor is 1-3/4″ Thread Length The length of the threads on the anchor is 1-3/4″ in length. Minimum Embedment The minimum anchor embedment into the concrete is 1″. Therefore, the anchor must be installed so that a minimum of 1″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 3/4″. This will ensure that the minimum embedment of 1″ will be met. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor.
The 3/16″ diameter anchor requires the hole in the fixture to be 1/4″. Spacing between Anchors Each anchor must be spaced a minimum distance of 3″ from each other when measured center to center. Edge Distance It is very important not to install the anchor any closer than 2-1/4″ from an unsupported edge of the concrete.
Features Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable.
Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. Climaseal coating provides extra corrosion resistance. Dimension – 11. 75 x 4. 5 x 7.
Ideal for projects that require heavy-duty holding power, Tapcon screw anchors are the stronger, faster, and easier masonry anchoring solution. They install in less than half the time of wedge anchors or sleeve anchors and have 20% more holding power.
Tapcon anchors are suitable for use in concrete, both indoors and outdoors.
Applications The anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. Environment The anchor is designed for use in a Wet environment.
Hole Diameter/Bit Diameter The anchor requires a 1/2″ hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Minimum Embedment The minimum anchor embedment into the concrete is 1-9/16″. Therefore, the anchor must be installed so that a minimum of 1-9/16″ of the anchor is embedded into the concrete. Spacing between Anchors Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.
Edge Distance It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.
Manufactured for top performance in masonry-based applications, concrete screw anchors are designed to fasten objects into concrete, brick and block. The blue Perma-Seal finish on this Tapper provides long-lasting corrosion protection.
Its high-low chiseled threads allow for a steady drive and installation torque reduction. Its various features and state of the art design make this anchor an excellent alternative to expansion anchors, plugs and lag shields.
General applications and uses include attaching electrical equipment, 2 x 4, flag poles, hurricane shutters, window installations and more. The Flat-Head Phillips Tapper Concrete Screw Anchor is quick to use and easily installed with a matched tolerance drill bit, which is included with C-Paks.
Tapper screws are perfect for interior and exterior projects. Use for light to medium-duty applications. Various DOT approvals.
I’m reviewing the 3/16 x 1¾ Phillips tapered head concrete screws. Why can’t we get tap con screws at CTire? Out of the 8 screws in the package I bought, 2 of them kept binding and the Phillips slot got stripped.
Why can’t a concrete screw just do what it is supposed to do? I’ve also tried the hex-head versions, and while the heads don’t strip out, the screws would quickly snap if they started binding. Most dreadful part of any home project is dealing with these concrete fasteners.
Steel Material; Nut Includes; 1. 55 in Usable Length; Grip Range; 0. 3125 in Shank Diameter; Drill Size; 3. 25 in Shank Length; Also Known As; 2. 25 in For Maximum Wall Thickness; No RoHS Compliant; 1.
25 in For Minimum Wall Thickness; G. S. A. FF-B-588C Specifications Met; 900 lb Tensile Strength; Hollow Wall For Use In; 2300 lb Shear Strength; Tee Head Style; 4 Package Quantity; Yes Removable; 1.
55 in Thread Length; 5/16″-18 Thread Size; Right Hand Thread Direction; Washer Includes; Ceilings For Use In; Imperial System of Measurement; ASTM B633 Specifications Met; ANSI A58. 1 Specifications Met; Zinc Dichromate-Plated Finish; Wood For Use In; Concrete For Use In.
K Hardware Stores is made up of 4 True Value Hardware Stores that have been in business for over 100 years. Let us help meet your needs while in the comfort of your own home.
I’ve been using these anchors for 3 years and have seldom been disappointed with the outcome. I’m a volunteer with the Rebuilding Together group and assist low income home owners, most of them living in old brick homes.
Most frequently I’m anchoring grab bars around bath tubs. Finding a stud in the right place for a wood screw is pretty hit and miss. Quite frequently we need to mount through plastic, ceramic tile, plaster, and whatever’s behind that, all in one install.
When we use the right drill bit these anchors will get into and behind the layer and give a secure fix. I start with a smaller drill bit and ifI get lucky and hit wood, I just go with that and save the Alligator for the next hole.
I’ll also mention that these work quite well in wood holes that won’t holda wood screw. That beats stuffing pieces of wood into the enlarged hole and hoping for the best. The Alligator appears to be made of nylon and is far superior to plastic anchors.
And Parts Accessories ships fast and I don’t have to bearthe expense of buying the screws with them. Good Job, Guys & Gals!!.
I started using plastic anchors over 55 years ago and these are with out a doubt the best I ever used . Menards quit carrying them so I buy them on line now.
Best Wall Anchors For Concrete Block Buying Guides
What are wall anchors for concrete block?
Wall anchors for concrete block are used to provide support for shelves, cabinets, and other items that are mounted on walls. The wall anchor slips into a hole drilled in the concrete block and is held in place by friction.
The wall anchor is then used to screw a screw into the wall anchor, which provides support for the item that is mounted on the wall.
How do wall anchors for concrete block work?
Wall anchors for concrete block work by drilling a hole in the wall and then inserting a wall anchor into the hole. The wall anchor expands as it is inserted into the hole, which creates a tight fit.
The wall anchor is then secured in place with a screw.
What are the benefits of using wall anchors for concrete block?
walls
Some benefits of using wall anchors for concrete block walls include:
-Increased stability and strength of the wall
-Anchors can help to resist high winds and seismic activity
-Can be used to repair cracks or damage to the wall
-Allows for expansion and contraction of the wall without damage
How to install wall anchors for concrete block?
First, drill a hole in the concrete block using a hammer drill and a masonry bit. Second, insert a wall anchor into the hole and tap it in with a hammer. Third, screw the anchor into the hole using a drill.
Fourth, put a screw into the anchor. Fifth, tighten the screw until the anchor is secure. Sixth, remove the screw. Seventh, put a hook or other object into the hole. Eighth, screw the hook or other object into the anchor.
What are the different types of wall anchors for concrete block?
There are several types of wall anchors that can be used in concrete block. The most common type is the expansion anchor, which is inserted into a drilled hole in the concrete and then expanded with a tool to create a secure hold.
Other types of wall anchors include the toggle bolt, which has a toggle mechanism that locks it into place once it is inserted into a drilled hole; the Molly bolt, which has a sleeve that expands when a screw is inserted to create a secure hold; and the wedge anchor, which is inserted into a drilled hole and then driven into the concrete with a hammer to create a secure hold.
How to remove wall anchors for concrete block?
To remove wall anchors for concrete block, first use a drill to remove the screws that are holding the anchor in place. Next, use a chisel to break the anchor free from the concrete. Finally, use a hammer to knock the anchor out of the hole.
How to repair wall anchors for concrete block?
Wall anchors for concrete block can be repaired by using a hammer and chisel to remove the old anchor, and then using a new wall anchor and screw to secure it in place.
How to troubleshoot wall anchors for concrete block?
If your wall anchors for concrete block are not working properly, there are a few things you can do to troubleshoot the problem. First, check to make sure that the anchors are properly installed. Next, check the condition of the concrete block.
If the block is cracked or damaged, it may need to be replaced. Finally, check the condition of the wall anchors themselves. If they are damaged or bent, they may need to be replaced.
Conclusion
Wall anchors for concrete block provide an effective and permanent solution for cracked or damaged walls. They are easy to install and require no special tools or equipment. Wall anchors for concrete block can be used in both new construction and repair applications.
