20 Best Tonneau Covers For Tacoma (2023 Updated)

I took my time and read the directions a couple of times. Placed all the parts on the bed of the truck and slowly put it together. I’m too old to be doing things fast and incorrectly. Once I finished and looked it all over I was very pleased.

It looks awesome. Very Happy with the purchase.

I have had two other tonneau covers on previous vehicles. Both were other brands and did an adequate job but the Truxedo Lo Pro was easier to install correctly and was a perfect fit for my Tacoma. The mechanism for attaching the rails is specific to the Tacoma rails and provides a very secure and clean installation.

The fit of the cover after installation was absolutely perfect without any adjustment. This cover also has the seals that will make the inside of the bed virtually waterproof when the cover is closed.

I would highly recommend this cover for Toyota Tacoma owners who want the full use of the bed which is not available with the Toyota OEM fold up cover.

This is my third Tacoma where I have used the Truxedo cover. All excellent and functional. They have been easier to install each time. This one is on my 2016 Tacoma TRD Off Road machine. The vehicle specific installation hardware made a quick 35 minute job of it.

I would like to see them make a more sun resistant rubber seal at the tailgate. My first two cover seals on my 98 and 08 Tacomas deteriorated and crumbled away in 2-3 years. The rest of the tops wore well and looked great considering my trucks are parked outside 24-7-365 for 8 years or more in NE Ohio.

The UnderCover Flex is a top quality tri-fold hard tonneau cover that looks as good as the OEM product offered by Toyota. There were a few issues I had to deal with. They had to do with water leaks. One at the rear bed bulkhead;(fixed with waterproof “Flex” tape), and the second at the tailgate.

Through readjusting the cover on the bed and using a tailgate seal,I was able to eliminate the water leaks. I’m satisfied with the purchase and a satisfied repeat customer with Auto Anything.

This cover installs easily with basic tools, and seems pretty sturdy. After washing my truck with a pressure washer, I noticed that some water got into the bed from all sides but that was expected since the cover has thin rubber seals all the way around.

I have a bed mat and very little water got onto it, so this cover paired with a mat is a great combination to ensure your stuff stays dry. I haven’t driven in the rain yet, but I doubt any water will get in under normal conditions.

I spent several minutes researching what tonneau I wanted for my new truck and the Undercover Flex easily stood out among the rest. It was a super easy installation that used the OEM bed tracks. I took my time and still had it installed in about 30-45 minutes.

A few days later I had an oversize load to haul and was able to drive around with it folded up and secured using the metal rods – rock solid. Would definitely buy again should I ever get another truck.

Got the Extang Solid Fold 2. 0 Tonneau for my 2016 Toyota Tacoma within 3 days. I had reviewed the various Extang installation videos (one in particular for the Toyota Tacoma) and installation was easy.

It is very straight forward; really wouldn’t have needed the video. Only issue was a broken clip (clip to hold it folded); probably happened in shipment. Called Auto Accessories Garage and they had a replacement clip to me within 2 days.

Amazing service and the Tonneau top is a nice addition to my truck. Very happy with service, the topper and the way it looks.

I read many great reviews about this cover, and comparing them to others, I found it’s price-to-performance ratio to be the best. I can say that after installing it, I am not disappointed! Looks great, is very functional, and feels secure.

The one thing is that on a long bed 2016 Tacoma, the fit is tight – to clamp the rear fold, the brackets must be as far to the end of the rail as possible, if you want to keep the clips/stoppers that are in the rail in place.

It will almost seem as though the rear isn’t covered, but it is. The weather sealing is great, and the included inserts to cover the gaps in the header rail is a nice addition.

Easy to install. Leaks a bit along the sides. Will be adding some weatherstripping to hopefully seal it better. Wish the sides had thick seals like the header rail near the cab. Other than that, the tonneau looks great and feels very secure once clamped own.

I was worried that the middle section would be easy to lift up and get into by a thief, but the panels interlock and doesn’t budge. No worries there.

This is my first Tonneau cover. I went through a lot of reviews before deciding on the Undercover SE. A friend of mine had one of the triple fold kind and gave up trying to keep it from leaking. He replaced it with an Undercover SE.

My primary objective was to keep the bed dry and secure. This cover does an excellent job of that. After installing the cover, I took the vehicle to the car wash. The bed cam out bone dry! The cover was easy to install.

I did it alone without any assistance. I suggest watching a YouTube video so you have a better idea of how to proceed.

Before purchasing the SE, I had a soft roll up cover. While the soft cover had a lower profile look and quicker access to the full bed, keeping the rain out of the bed was a challenge. After extensive research I decided to give the SE a try.

Installation was very easy. Don’t be afraid to adjust the front brackets repeatedly until the gaps around the bed perimeter are relatively even to prevent potential rubbing of the paint. It looks better than Elite in my opinion.

Absolutely water proof.

Regarding delivery,the box was beat and torn but the internal packaging kept the item safe except for a small scuff mark which I can live with. Installation was easy and only needed another person to help lift the cover onto the truck bed.

The brackets use the deck rail system. I improvised by putting a thick zip tie behind the nut that slides into the rail system. I got the bolt to attach then slid the zip tie out. the hydraulic lifts do limit use of the sliding tie down brackets.

Overall pretty impressed by this cover for the price. I think the whole bed rail/track thing that Toyota has done with these beds is complete garbage, but there isn’t much I can do about it. I was Leary of ordering because of the rail system but everything I needed was included.

I didn’t make any changes or have to mod anything. All the brackets and things I needed were included. The material of this cover is actually much better than the extang I had on my f-250. We will see as time goes how she holds up.

To anyone considering this cover, just order it. It’s nice and does the job. The only complaint I have is the back of the cover near the tail gate. The seal doesn’t exactly hit the gate lip. It touches but it’s just not centered over it like I would like it to be.

In order to achieve dead center the cover would actually have to hang over the back bed panels. Everything else centers right. With that being said, I don’t think there is anything this company can do about that either.

It’s the way Toyota made the bed. Update 3/18/12: It rained pretty good yesterday and much to my surprise, the bed was really dry considering the little spots on each corner of the bed the have daylight coming through.

I also got to take the truck on highway speeds today as I have a 45 mile drive to work and this cover didn’t even act like it wanted to move. I seen earlier reviews that suggested movement from the front of the cab.

Not the case here. I am also going to try and upload some detailed photos to give individuals a better idea of installation. Hope this helps.

This product was easy to install, IF, you use the attachments provided with the type of vehicle you have. I struggled with this for close to an hour and finally looked in the bag and there it was, the attachments for my existing rail (2005,Tacoma, dbl cab).

The hardest part of fitting the tonneau cover was the clamp down location. (3 slots at each location). It was just a matter of choosing the right one and then unscrewing/screwing them back together. This cover is easy to remove when you need the whole bed to transport stuff and easy to reattach after.

The only drawback to this system since it is easily removed is that you must purchase a locking tailgate unless it comes standard with the truck. My 2005 did not come with a locking tailgate and I purchased one back in 2006 so I had no problems.

You will not be disappointed when buying this item.

So the giant box arrives which is always a good sign that very little assembly will be required. Nicely protected inside with foam and cardboard. Threw out the instructions, took off my utility rail tie downs and set it on top the bed up by the cab.

I slid the aluminum rail adapters in the rail and they fit perfectly. I unfolded the cover and began eyeing it for alighment. The front needed the foam strip as expected and it was positioned for securing.

No issues, took maybe 1/2 hour to install, could be removed in 5 minutes. The good: price, quality, ease of install, seal, performance in wind. The meh: fit, my 09 Tacoma has tapered bed sides, bowed out in the middle and the tonneau is straight.

This may bother some anal retentive types. If you have linear symmetry issues, you need to spend another $500. The bad: none, I like it.

Impressed with quality for the price. The ease of folding and the engagement of the lockdowns was very easy. It took me a minute to figure out the correct direction to install, but once figured out, it was a breeze.

Great material as well. Looks amazing on my 2020 Tundra. There was also great service when calling to order. They answered all my questions immediately. Thanks team for the great support and product.

Not the best pic, but only one during this review.

Very pleased. Has smooth look of a soft cover but security of a hard cover. Latches could be a little more substantial but should hold up if you’re careful and use is not too frequent. Would be better with same quick release latches (rather than screw down type) at front behind cab to make easier to remove entirely.

Also could benefit from mid section latches to help make more secure and wind proof. As designed only has attachments at front and back with nothing in middle.

I was torn between a Leer Topper or a Tonneau cover. I really didn’t want to lose the height with a topper, but I liked the security of being able to lock things up while traveling. After through research I decided on the Lund “hard” trifold tonneau cover.

Excellent choice for all my needs. Light weight. Secure. Very easy to install. It took more time to open the box than installation.

This looks nice. Recieved this from my wife for my birthday. The install is pretty simple with some changes from the instructions. The bed on the supercrew is not straight like the other beds so the side bars have to be coaxed into a slight bow so leave the 4 corner pieces loose till you get the clamps installed.

You cant use all 6 as the 5. 5 ft bed has closed side rails in the middle so can only use 4 clamps. So loosely assemble the rails then put all 4 clamps on loosely. Then pull the side rail to the edge of the bed and tighten both clamps on that side then repeat for the other then tighten the corner pieces up.

The cover is a bear to stretch so be patient and don’t do the rear till the rest is clipped. Can not say how it holds up but have done a drive to over 70 and everything stayed in place and really makes the truck look sharp.

No way to add a pic but would if I could.

Once the rails installed I could not stretch it enough to snap the two rear corner snaps. Every time I want to roll it up have to remove the back cross member rather than it being attached to the cover.

And the snaps are cheap plastic and cannot wait for them to break. I liked the old 1980’s style metal snaps better! At least could pull them with a snap puller. Wish I had spent $20 more to get a good one with velcro hold downs.

Thought the “Hidden Snaps” were different. Sorry but I am not a fan of this thing at all. Hope it lasts till summer in Michigan weather!.

Easy to install, easy to snap on and off and appears to be of Good quality. Have made one long trip so far with no real problems with the method of attachment. One issue with the slats slipping off. Solved simply by wrapping them with electrical tape to the clamps.

Only issue for me is the excessive scallop between the ribs so it seems to stretch a little especially in the sun. The last cover I had lasted about 14 years was tighter but had more difficult snaps.

This only has to last me a few more years till I get a new vehicle. I fully expect it will! I seem to get 1-2 miles per gallon better mileage than with an open bed, about 10%. That’s a savings about $140 per year for me.

So this cover pays back in less than a year.

Made from Aluminum. I have to say the installation was easy, it fits good and looks good but just after I did the installation it rained and each corner leaks into the bed area. I am going to go to my local hardware store to get some rubber seal tape and try to use it to seal better to my plastic bed top area.

I will then see what I can do to plug the gaps in the corners. I kinda expected it would require some fabrication support on my part but it still is a little disappointing. One other note, my kit came with 3 large foam blocks added because of the 2021 Silverado it is going on.

These attached to the underside of the 2nd section to keep it off the glass when in the up position. Not a big deal but when closed these do hang down in the bed area and can be knocked off if you slide in anything tall enough to hit them.

This was not noted in the description when I ordered it.

I was looking for a cover for the bed of my 2021 Chevy Silverado that would keep the bed dry, give me full access to a part or all of the bed, and could withstand some weight. The BakFlip G2 does all three.

It was easy to install with no drilling. With its folding design, I can open up a portion or the whole bed. I do suggest getting a helper to lift the cover into the bed and place it on the rails. When the cover is fully down and the tailgate is locked, the bed is secure.

After washing the truck and hosing down the bed, only a few drops of water could be found in bed. My guess is that the 300 lb. weight limit is accurate.

Overall good construction, beware if you have a drop-in bed-liner though. My liner did not seat against the front of the bed closely and as a result pushed the rails for the backflip aft and created an interference with the tailgate.

Had to cut slots in the liner to push it forward enough to eliminate this interference. Overall not a huge deal, but be prepared to modify your plastic liner if you buy this cover. Once again good quality kit, happy with the end result but these installs never seem to go as seamless as promised.

Only other thing was the aluminum clamps that interface with your bed require some extra attention and can be seated too deep into the rail. Just make sure that the ridges on the clamp and on the rails seat in the valleys, and not across the ridges.

This cover is great – i like how it is flush to the bed and opens easily. The only issue I have is that there is a slight water leak when it rains and it appears that the 2020 Tacoma bed rails (plastic) have bumps and ridges that the BakFlip rubber seal cannot overcome.

I am experimenting on how to make the seal better without silicone or other sealants. Great cover otherwise!!.

Overall I am happy with my new Tonneau Cover that I put on my 2020 Tacoma. Has a low profile and functionally works great. 2 Complaints: 1) The instructions are a bit vague in places. After a few minutes of head scratching I figured it out.

A bit of clarification and/or better pictures would fix this. 2) The clips that hold the rods that prop up the cover when folded are cheap plastic. One was broken in the box. A 30 cent part is the reason I give 4/5 starts.

I would recommend this cover to others. The clips are annoying and eventually could cause damage to the rods if they are not properly clipped out of the way.

The Bak Flip MX4 tonneau cover works exactly as described. The manufacturer must be quite busy, as it took a full month before they shipped out my cover. A small plastic trim piece arrived broken in the box, manufacturer said they’d send me a new piece right away, but it’s been 3 weeks now and still hasn’t arrived.

Other than that I’m very pleased with it, and it looks great on our new Tacoma!.

Cover looks good and installed ok. I’m only giving 3 stars because of packaging. I think I was sent an open box item. In the box I received instructions for installing a rough country lift kit. The parts were in Ziploc bags.

After installing the frame onto truck and started putting cover onto rails. I found that the head rail and tailgate rail were both missing a tab for holding cover in place. I had to take the frame back off of truck.

I found the missing tabs loose in the box. I was able to put those tabs onto the rails. Overall happy with the cover, frustrated with everything else.

The quality of materials used to make this cover is not reflected by the price. This is my third cover and by far the lightest and easiest to use. The company has been around for a long time so getting parts (if you need them) will not be a problem.

My wife finds this soft cover to be easier to work than the hard cover and had and the previous soft cover. It is backed by a great warranty for years of trouble free use. It is no where near as secure as the hard cover I had, but for the most part it is out of sight out of mind when it comes to stuff in the bed of a truck.

I have been out of town with a $1,500 mountain bike in the back under this cover and I still have my bike. Great looking and light are the best features of this cover.

Cover does not fit tight. The tarp is too big. The bows have very little arc to them and the cover just flaps in the wind. Extang wants a serial number that is on the box which I do not have, without the serial number they will not do anything.

I would not recommend buying this cover.

I am new to installing a tonneau cover, but the Leer HF650M tonneau fits perfectly on my 2022 RAM 1500 with a 5’7″ box. However, the installation instruction was not very informative. It wasn’t too difficult to install, but I had to figure out a few steps to complete the installation.

The kit included a roll of foam tape, but there is no instruction for where and how to use it. I am guessing it goes on the bed’s top edge between the cab and the bed because I see water gathered on the bed after a rain.

I would rate Napa 5+ stars as the supplier of this product. The install instructions from Leer were useless and vague. No mention of what to do with the supplied foam insulation. Photos of the cleats to hold Leer rail to existing Toyota bed rail were indecipherable.

Fortunately, I found directions on YouTube or I would have been forced to send it back. Considering it is a >$1000 item I expect more from the manufacturer.

This is the best tonneau cover Ive ever own. It looks great on my 2019 GMC Sierra Denali, with the low profile look! The cover is very easy to assemble with one person, it took about an hour. Opening the cover can be done one either side of the truck with just two fingers.

The Undercover Elite LX is a great addition to my new truck. Last week I installed the BedRug, and the Elite LX looks fabulous with it. There was a little problem with the ordering, but worked out quickly and easily with an email to customer service.

Fifteen days from order to delivery; not bad, but I was maybe expecting a bit better. My credit card was charged the day the order was placed. The box was torn up a bit on delivery, but the cover had not a scratch.

There were clear directions on the box about what to do upon receipt of the carton. One slightly confusing part was that on the carton it stated clearly to not open the box before confirming that the product was exactly as ordered.

including color. How to determine the color of the product in the box without opening it??! I called customer service, and confirmed that the product number was correct, ,so the color should be correct.

It was. Installation was not quite as fast as a couple of YouTube videos had suggested. The front bracket measurements were, in fact, mere suggestions. I had to fiddle with it quite a bit to get it correctly placed.

Bit once installed (1 hour, with the help of my 11-yr-old daughter), it is fantastic! Looks great, and it will be very functional. I love the fact that it is secure, with a lock mechanism that is keyed to my ignition key.

I had been looking for a tonneau cover for my new truck for awhile but was shocked at the price from the large competitors. Then I found UnderCover and, after looking at their reviews, I placed an order.

Best way to describe the product received is OUTSTANDING. This is a high quality cover that was very easy to install. Paint match was spot-on. They even provided hooks to hang the cover when not in use.

If you are looking for a tonneau cover, UnderCover should be your first choice!.

Purchased this cover right before Christmas expecting it to come mid-January. It arrived before Christmas and my wife and I installed it! It is a great fit for my truck and I love the way it protects the bed! Great product and value!.

This cover is amazing and I feel was worth the money I spent for it. The quality seems to be as good as any I’ve ever seen. The material fits nicely, but it took me sometime to get it installed. I wanted it perfect on my new truck.

I was able to do that and it looks fantastic! After now having used it for a couple of months, my only tiny issue has been that the cover doesn’t slide as well as it did at first. I am going to guess that the track needs to be lubricated as the lubricant that was provided worked fine, it simply wasn’t enough, nor does it last a long time.

It has rained on the cover several times. The cover keeps the vast majority of the water out, but it is not waterproof. Some does eventually get in, but it was less than expected. Overall, this is a top quality cover that has meet or exceeded my expectations in virtually every way.

I am satisfied and would purchase it again if or when the necessity arose.

Shipment came quick. Install was easy! Fits well & looks great while keeping water out. I would recommend this cover to anyone looking for a quality product for a great price.

I had the jack rabbit on a different truck, it’s the model under it. This one will do the trick which is let me lock up my stuff as needed. Rolls in and out good, latch seems to work good, and pretty easy to install.

It’s not water proof so if you’re looking for that feature, it does leaks a little. Overall pretty happy with it.

Purchased this kit for my 01 Silverado stepside, instructions were basic, but adequate. You can tell that the stepside model was kind of an after thought because the mounts actually SCREW to the inside of the bed/box instead of clamping.

The holes in the aluminum hardware weren’t deburred when they arrived, but that was easily fixed. That’s really my only complaint with this. The cover is very taunt and moves very little when latched in place.

Since it opens from the inside, I added a locking handle to get a relatively safe area to stow things; it’s almost like having a big trunk. The cover keeps most all water out and looks great. I picked this over others for its low profile- the pictures speak for themselves.

Mine stands about 1/4 inch above the bed. I’m happy with it!.

I had to replace the cover that I’ve had for 15 years. I purchased a cover made by the same manufacturer for the same truck. Things didn’t quite measure up and I had to make some modifications. That said I would buy it again because it came quickly and looks great.

Part was delivered in a timely manner. It was packaged well and everything was there like it was supposed to be. Installation was pretty easy. Fitment is perfect and it doesn’t stand out too much on the truck.

I was replacing a generation 1 BakFlip cover that the last panel had given up. The MX4 is physically lighter and seems to be more solidly built. The BakFlip supplemental instructions for a Toyota we’re almost unreadable.

Copied too many times. Overall the installation went easy. The new style rail attachments are a improvement over the original. Total installation time was about 60 minutes with the most basic of tools.

It took extra time to get the old rail mounts off. Installation mod for the drain tube. On my old cover I drilled an elongated hole in the bed sidewall 6″ down from the drip tray. Route the drain tube right out.

Overall, I am pleased with this cover. However, the instructional had something to be desired. Installation worked out find despite a couple of the parts not looking like the photographs in the instructions.

The only downside I can see with this cover is: this cover renders the OEM side rails unless. I have a 2014 Tacoma and the MX4 side rails mount in the OEM side rails. According to a YouTube video, the MX4 mounts slightly different.

I can live with this.

Fits perfectly try on my 2006 Tacoma Long bed. Install was easy. Looks amazing. It’s rock solid so far. One thing to note for 2nd Gen Tacoma owners. you will lose your bed rails. I installed extra bed D-Rings so I am OK with this.

I opted for SE version, as it was same price as Classic. (I’ve owned the Classic on a previous Tacoma. It worked perfectly & I loved it. ) Pros: The SE version looks more stylish. The hinges look to be sturdy.

Cons: The back “scoop” collects water when it rains (I park on a grade). When opened, the tonneau trickles a little water into bed (at front) from run-off. This may have to do with the hinge lift. The high gloss clear coating does not add to the looks & concerned it will peel with age.

Great cover but their instructions are terrible. Might as well be explaining a city in China. Terrible. For instance, they never mention that for aft bracket, you will be using the truck existing bolts.

Also, as another mentioned, start the bolts in the aluminum blocks BEFORE you insert the bracket, saves A LOT of time. My only critique on quality is the lock key was so loose, it spun around when trying to lock the cover.

Needed a hex wrench to tighten.

I just purchased and installed this. The install went smoothly and only took about an hour. The instructions could be a little better but they aren’t bad. The unpainted black looks very nice on my truck and I don’t have to worry about scratches if I take it off or put stuff on top of it.

It would have helped to have someone help me lay it on top of the bed while installing. It’s not heavy but the size of it makes it a little hard to handle. But that would be the same for any hard cover.

The operating wires do not work correctly. It takes me all my strength to pull the wire to release the catch. My wife cannot pull the cable enough to release the catch. I have been on to BAK Industries who are sending me replacement operating cables which I have to install myself.

Overall the cover looks good, but the operation to release the cover is really really poor quality.

Two of the plugs that fill the holes on the front of the cover were missing. I emailed the company but there was no reply.

Best tonneau cover I’ve purchased so far. Not noisy at all, doesn’t rattle. Very easy to install within minutes.

I am happy with the cover so far, about 2 weeks with it on. Easy install on my ’10 Tacoma. Slid right into my bed rails and just tighten up. The structure is very light seems sturdy but wouldn’t place anything heavy or let enough heavy snow accumulation on top of it.

The only sealing issue I’ve had is the rubber that touches the bed near the rear window covers the majority of it except for the corners (which it says in the instructions, so it wasn’t a surprise). Easy fix, just pick up some foam or I got some silicone.

I like this cover, the vinyl is thin and isn’t covered by the warranty (the hardware is), so I’m nervous about cutting it. But I recommend this cover. Nice and affordable.

Light weight and easy install. I give 3 stars because the bolts holding the brackets in rail system has to large of a head which makes it difficult with the back latches. I had to purchase low profile headed ones to make it work easier.

First installed with side rails on my 2010 Tacoma. Had had been scouts on headboard and on tailgate. Contacted support they said it would lay down they build it that way. Try to explain it would be impossible to lay down 1/2 inch.

I’ve been removed the sideboards but the cupboard will not cover the holes in the side of the bed. I said several pictures to the company they failed to respond. Spoke with two different representatives from the company with no positive results.

Overall great value, it will hold the snow! I have two minor ‘beefs’. First, it should be tapered like our beds, it looks weird sticking out over the rear a little at the corner and covering only half the rail at the front.

The other issue that may never be an issue is with even the slightest holding pressure the plastic ends the connectors are on flex in the middle metal cross bars quite a bit. more than I think they should.

Time will tell if they will hold up for long.

I have had this cover for just about 1 year. The adhesive that holds the weather stripping has failed. The plastic pieces are breaking apart. I’m very disappointed in this product as I have used LUND products before with great results.

I’m not sure of the warranty, but I would very much like to get this replaced with a new one.

The assembly instructions aren’t very clear but it goes together logically, all the parts were there and they fit exactly as they should. It it amazingly convenient. It can be opened as far as you need or all the way.

The same for closing. I have used it to close on long boards where it was sturdy enough to hold them in place during trips. I wish I had this much earlier and I would have saved myself a lot of inconvenience trying handle the factory tonneau cover.

which was a bear to lock in place and relock everytime I needed access to the truck bed. The only down drawbacks are the space lost to the mechanism and the fact that it isn’t waterproof. There are some large open gaps at the tailgate.

The Bedlocker is an expensive item by my standards, so I was hesitant to make the purchase but did so because my wife will be using the truck, which is tall and she is short. I installed the cover by myself and was pleased with the simplicity and reliability of the design.

Everything fit together as it should, without issue. All the components in the kit were excellent quality, as they should be for an item in this cost range. The power cord was housed in a durable breathable nylon fabric which speaks to the attention to detail.

I have a Roll-N-Lock on a second truck and it has performed very well over the last 5 years. It is a manual open-close model, which a short person would have some effort with using. The electric operation of the Bedlocker is going to be a very nice upgrade.

The only issue I have found is with one of the remote controls. When depressing the close button, the edge of the button wants to catch under the plastic housing. You have to be deliberate to press directly down on the button to prevent this.

The rest of this review will have to wait another 5-10 years – to determine the reliability of the motor and drive train.

The installation was a challenge because I needed to install a 1″ spacer on each side of the bed rail for it to fit properly. I also ended up using self tapping screws to secure the rails to the inside of truck bed because the clamps did not work with the 1″ spacers on each side.

Once installed, the automatic feature worked very well and with the Bed Rug installed earlier made my truck bed easy to access and a pleasure to use being that I’m not hauling aggregate, dirt or rubbish.

The Bed Rug and the Pace Edwards BedLocker Tonneau “Automatic” Cover turned the bed of my truck into a very useful trunk space. I would highly recommend these products provided you have other trucks to haul dirt and junk.