When you shop through links on our site, we may earn an affiliate commission. This educational content is not intended to be a substitute for professional advice.
The side steps for the Ram 1500 are designed to provide easy access to the truck’s cab for passengers. They are also useful for getting in and out of the truck bed. The side steps are made of durable materials and can withstand a lot of wear and tear.
20 Best Side Steps For Ram 1500
Product Image
Product Name
Features
Price
Amp Research 75138-01A-B Ram 1500 PowerStep
High-strength, die-cast aluminum-alloy linkage arms, anodized and PTFE coated to resist corrosion
Invented, engineered and built in America, AMP Research PowerStep have been tested and proven in long-term, real-world, driving conditions performing flawlessly in snow, ice, dust, mud and dirt. The lightweight, yet rock-solid running board and rugged die-cast linkage components are crafted in the USA of aircraft-quality aluminum, black-anodized and PTFE coated for maximum corrosion protection.
Precision, stainless-steel hinge points and bearings ensure trouble-free action. And the heavy-duty electric motor is designed and tested to provide reliable, maintenance-free operation for decades.
Steelcraft is the leading manufacturer of truck and SUV accessories since 1998. Starting with designing and building products from cold, hard steel, Steelcraft then produced grille guards and rugged nerf bars.
Nowadays this company develops the most exclusive tubular accessories in the world. What brought Steelcraft to the new level of manufacturing is the cutting-edge design of its products. Being first to deliver a police bar for Dodge Charger to the automotive accessories market, the company has an ability to develop and produce accessories for the newest model vehicles earlier than other manufactures.
Most products that Steelcraft makes are made of premium T-304 stainless steel to provide the highest durability.
Strong and Sleek Design. Amp Research answers the call with these PowerStep Series Running Boards. With a striking black powder coat finish to ensure safety with maximum grip, these running boards are as durable as they are sleek.
Teflon Tough. The military spec, anodized Teflon finish resists corrosion, while high-strength, die-cast, aluminum-alloy linkage components bring the durability to new levels. These boards also have a 600-pound load capacity.
The cherry on top? A standard integrated LED light system that will guide you in the darkest of backwoods trails at night rounds out this solid, sleek package that’s an absolute must-have for any Ram owner.
Electric, Direct-Fit Installation. Designed to bolt directly to the factory mounting points on your Ram, these electric boards instantly extend when you open the door and hide away when the doors close.
Made in the Usa, this pair of running boards from Amp Research is warrantied for 5 years or 60,000 miles. Application. These bolt-on, electric Amp Research PowerStep Running Boards with LED illumination are made to fit your 2002-2008 Dodge Ram Quad Cab or Mega Cab.
Choose from 1 of options above for the best choice.
Just had 2 full knee replacements 6 weeks apart. I don’t recommend that for everyone by the way. however I didn’t really have an option in my case! The AMP retractable running boards have made an AMAZING lifetime difference and amount of difference the ease of getting in and out EASE getting in and out of my 2500 Dodge Ram Truck.
My wife is totally amazed and satisfied with the ease of getting in and out of the truck with the retractable steps.
I love my power amp board. I bought a lift truck and it was to high to get into. I pulled my groin trying to get in and out of my truck. I put the amp boards on and it made a world of a difference
TYGER AUTO focus on developing premium aftermarket auto parts that meet or exceed OE quality standards. All TYGER auto parts are covered with No-Hassle and will make your vehicle stand out on the street Fitment 2009-2018 Dodge Ram 1500 Quad Cab (Including 2019-2020 Classic) For 2009-2011 and some 2012 models minor drilling required for 14 holes through the pinch weld for support brackets.
First received running boards without the hardware to put them on, a brief call to Tyger and they had them to me in 4 days. Install went smooth. I would suggest getting a magnetic stick because I had to drop part in the hole and then use stick to work it in the two holes that the thread has to come out.
(Not enough room to attach like the video) after getting all six on the installation went smooth as pie. Very sturdy boards unlike my previous ones. I have a 2014 dogge ram 1500 quad hemi. These boards are well worth the price!!.
I’ve updated this now that I’ve completed both rails. This is the first time we’ve done a rail install and it took us about an hour and a half for the first side. The instructions seemed confusing at first.
We watched a YouTube video to get a better idea. Tyger should do some videos. The second side took about the same about of time for a total of 3 hours. Overall, I thought the install was pretty easy.
Tightening the bolts and screws was what took up the majority of time. My only gripe is that all the parts and bolts and washers came in one big bag. Individual bags with some kind of labeling would have gone a long way.
Originally, I took off a star for this, but the rails look so good I put it back. Doing the passenger side, the middle hole where you have to fish the bracket through was tight. I’m a girl with smaller hands and was able to fit my fingers through with the bracket to jiggle it through.
so, you may need to get creative trying to get this bracket on. I read a review where the other guy used fishing line. We did some wheel blocks on the wheels and did not have to lift the vehicle. I have 2017 1500 Ram.
The passenger side seemed a bit tighter than thde driver side. I did the original placing of the brackets and then the bolts while my dad held up the bar then did the final tightening. I also purchased the matching front guard.
These steps are heavy duty and look great on my 2009 Dodge Rams 1500 extended cab. Design and attachment system is very well engineered. The first side took about an 1. 5 hours but the second took less than an hour once I know what to do and what tools I needed.
They are heavy much heavier than my stainless steel set I removed. I recommend a helper to assist in getting the steps in place once you have the screws located in the frame rails. Also I didn’t get any measurements from the dealer so here they are.
IMPORTANT – Only fit Quad Cab with 2 full-size front doors & 2 narrower rear doors. Not for Crew Cab NOT for Mega Cab. Step bars are made of 4inch wide heavy duty triangle mild steel tubing in black Powder-Coating for rust-resistant with UV resistant non-slip wide step pads while providing extra protection to your vehicle.
All mounting hardware and DIY instruction included. For 2009-2011 and some 2012 models, minor drilling required for 1/4” holes through the pinch weld for support brackets.
The instructions are just okay. We found a video, not for Tyger, and watched it just to get an idea of what we were going to do. Brackets for the front have a little plate (that holds the riser) facing the front tire.
On the center and rear brackets the plate goes towards back tire, see the first photo for driver’s side. The front brackets were easy to install because there were factory installed nuts on the truck.
The center and rear did not have those on our truck. They say to put a bolt into the nut plate to use as a handle while putting the welded-in bolt through the hole. Well, that doesn’t work because the oblong opening (under the tape) is a tad too small making it impossible to get the plate down inside as they suggest.
Go ahead and hold the plate up to the hole it is supposed to go into and the the oblong hole for installation. You’ll see what I mean. Tie string ( I used three pieced because I wasn’t about to spend hours trying to fish out a dropped nut plate from inside the body of the truck) through the nut end.
Slide the bolt end into the oblong opening and using the string (wrapped around your hand so it doesn’t fall) and a pair of needle nose pliers, maneuver the plate until the bolt goes through one of the bolt openings.
Immediately put on the square plastic retainer so it doesn’t go anywhere (screw it on). Now use the bolt with the plastic retainer as a handle and adjust so you can cut off the strings. Loosely attach the bracket to the bolt with the plastic retainer still on.
You can move the bolt around to adjust the nut inside to put the other bolt through the remaining (inside) nut. See the photos. Hope this saves you time!They look great on the truck and seem really sturdy.
Most importantly, this 5’2′ old lady can get into her truck a lot easier! Love them!!.
I just recently purchased my 2016 Ram 1500 and knew right away I would need some rails to help my wife and daughter with getting into the truck. I went forward with the order and was very happy with the product.
They arrived on-time and had no damage due to shipping. You will see in the other reviews, but the one issue with these, is the labeling of the six brackets you bolt to the side of the truck to where the actual rail is attached.
The front brackets have the tab facing the front, while the center and rear brackets need to have the tab facing the back. To accomplish this, look at the stamped letters on the brackets and on the driver side, in order of front to back, they should go DF, PF, DR.
On the passenger side they should be PF, DF, PR. Essentially, use a PF as the center bracket on the driver side, and a DF as the center bracket on the passenger side. Aside from the above issue, the rails are sturdy and have no problem handling my 300lb weight getting in and out of the truck.
My daughter (who is 5) loves them as she can easily get into the truck on her own now. The installation is straightforward, there are two ways to install, based on how your truck is configured. For mine, it was the easiest install option, as I had the holes already needed in the top and bottom of the brackets.
Ensure you do not fully tighten the brackets, as it says to, before attaching the rail. You will most likely need to shift the brackets somewhat to line them up with the holes on the rail. Once you have everything attached, you can then tighten everything up.
Last word of advice, if you live somewhere sunny, like Texas for me, do this in the shade or at least don’t wear shorts. I ended up with some sun burnt knees. but it was worth it!.
I love these steps. They came extremely well packaged. Everything was wrapped and Styrofoam was used to prevent shifting. There was no scratches, dents, or dings on my order and all the pieces were there.
I noticed when unpacking that some items were in a green bag and some a clear. As I separated them I noticed the green bags were all for the drivers side and clear for passenger. I had no missing pieces.
I read the instructions first. They were very adequate. Could have been a little better but they sufficient. The install went well. I installed by myself and took about two hours total. Most of the time was spent on the first side as once I did one side the second side went in about half the time as I knew what I was doing then.
The steps are very sturdy and nice looking. There is no wiggle or play in them what so ever. On my 2017 Dodge Ram 1500 Quad cab the front bracket location had pre-threaded holes. Yay! The center and rear holes I had to use the bolt plates.
Raptor said lets do things differently and make one exceptional product. Quality and style are the only way to describe these bars. They are functional, durable, strong and incredibly stylish. Available in stainless steel or e-coated black, this product was created to match your truck perfectly and it shows.
The product also features welded end caps on the stainless stele bars and plastic end caps on the black bars. The step pad measuring 4 inches offer supreme grip so that there is no slippage when entering and exiting the vehicle.
And getting into your truck bed has never been easier with a 3rd step! Raptor makes everything included in this product making installation incredibly easy. There is no required drilling and were made to line up perfectly with the existing holes on your truck.
Raptors product are made exceptionally well and it shows. Get yours today!.
Take a step up with a set of LUND’s 5 Oval Bent Nerf Bars. These oval nerf bars are designed to custom fit your vehicle, complementing the overall look while providing you with safe, sure footing in and out of your vehicle G?( no matter your shoe type.
In fact, each bar has a recessed step area with UV-resistant rubber grip pads providing solid traction and stability. LUND’s 5 Oval Bent Nerf Bars feature chrome-plated or all black matte finishes and are designed with a tubular shape and curved style, creating a rugged yet contemporary look and feel.
Designed and engineered to go the distance. LUND’s 5 Oval Bent Nerf Bars are constructed with a cutting-edge polymer material set within a lightweight, durable aluminum frame, making these bars tough as metal and virtually corrosion-free.
These bars, available in 80 and 87 lengths, also offers a broad stepping area designed larger than traditional step bars. Easy bolt-on installation. The nerf bars come pre-assembled and include custom mounting hardware for a direct, no-drill install.
Impressive Running Board Upgrades. Enhance your RAM 1500’s accessibility and safety by installing RBP’s Black Stealth Power Running Boards with Extended Drop. These running boards are engineered to deploy well-lit stepping areas each time you open the doors and tuck away once the doors are closed.
Additionally, they provide excellent durability and traction, making you feel safe whenever you board or alight your vehicle. Boasts a Rugged Construction. These running boards are crafted from 6-inch wide, military-grade aluminum and boast a ribbed surface.
Each component also features a sealed, Ip68 rated motor, so you can rest assured that they’ll remain functional rain or shine. Thanks to their impeccable construction, they’re able to support your truck’s high-performance needs.
Moderate Mechanical Expertise Is Required. To ensure that each running board functions properly, some drilling and extensive wiring work are required. Fortunately, there won’t be any splicing needed, so the task w.
Overall happy with the purchase. Works well. Looks great. Motors are louder than expected, but not unbearable/obnoxious. Install wasn’t terribly difficult. Instructions give step by step, but you will need to make adjustments based on your vehicle.
The safety stops (up/down) when there is unexpected pressure work great. Would have given it 5 stars if they were a bit less noisy. Spent a couple hours one night putting them in and then lost light.
Wrapped it up the next morning. Total Install time was about 4-5 hours, but it would probably be 3-4 if I did it again, as some of the time was figuring out the easiest/best place to route some of the wires specific to the vehicle.
Easy enough to install. The motors have a small discreet mark for identification, that I couldn’t find originally. So I installed them off the pictures would’ve worked, but my OCD wouldn’t let me leave 2 of them in the wrong locations.
Also I used a little silicone on the wire entering the cab from the Undercarriage. The wire powering the driver side door trigger was designed for the bench seat, I have the captains chairs so the length of that wire wasn’t sufficient.
But I made it work. The look and work great. Would definitely recommend to anyone interested in drop down steps or steps at all.
Safe and Secure Boarding. These Square Tube Drop Style Nerf Side Step Bars feature a 3. 5-inch drop and install around the height of your rocker panels to help passengers board your RAM 1500 Regular Cab.
In addition, these running boards offer a sleek appearance that hug your rocker panels and complement your OE paint with its smooth matte black appearance. ÿ Exceptional Durability. These running boards are made of aircraft-grade 6061 aluminum and are fully treated with an e-coating polish to prevent scratching and corrosion.
ÿ Clean and Polished Look. These running boards come e-coating with a matte black appearance and feature clean and flush welds for a polished appearance that will perfectly hug your rocker panels without sticking out too much.
ÿ Bolt-On Brackets. These nerf bars come with custom mounting brackets that install easily to your rocker panels using bolts and everyday hardware. These brackets offer a comfortable and secure installation and are rated to hold up to 300-pounds.
Auto Parts Specialist have created the perfect alternative drop step for those who dont want the traditional round tube step. The 2 square tube design adds an aggressive look to your vehicle while providing a large stepping area for entering/exiting your vehicle.
The step area is 6 wide. Not only are the steps visually appealing, but they are also manufactured from 6061 Aircraft Aluminum which makes them both lightweight and will avoid corrosion. These are great for those who live by salt water or on the roads that are salted during the winter months.
Upgrade your work vehicle with the new Steelcraft STX600 running boards. The STX600 utility boards are made to take a beating on a daily basis. These utility boards are constructed from 14-gauge carbon steel that is stamped with traction lugs for maximum traction in all weather conditions.
The STX600 utility boards will save you from potential injury while entering and exiting your vehicle. With its wide 6-1/2″ surface, it allows for a comfortable and safe step into your vehicle. Don’t worry about this running board rusting.
The STX600 is coated to resist rust and corrosion and then powder-coated with industrial grade powder. This board will survive through the elements and will take a lifetime of punishment. The Steelcraft STX600 running boards are equipped with end caps that will deflect material and help you keep your vehicle looking good.
This is a quality built accessory that will make your life easier so order a set of STX600 utility boards for your work vehicle today.
Material: Stainless Steel with PE Step Area. Rocker Panel Mount. Want to give your machine the look of a high-end trim level? Then these APG S Series OE Style running boards are for you. Manufactured from high-quality materials and featuring polyethylene step pads, they will also ensure secure, non-slip footing.
You’ll enjoy maximum safety in all weather conditions! Installation is as easy as ABC since the steps are designed for your specific truck.
Exactly the same as shown in the picture! Comes with both running boards. 4 inch heavy-duty black polished stainless steel oval tube with non-slip polyethylene step pads. Add an extra safety and security as the side protection for your vehicle.
Weight capacity : 500lbs. Come with installation instruction, mounting bracket and hardware. Professional installation highly recommended. Fitment : 09-18 Dodge Ram 1500 Quad Cab models only.
I purchased the 4 inch oval side step bars online – which was really easy and the representative was so helpful. The bars are really nice looking, sturdy, I love the nonslip foot pads and with the proper directions they’re not to hard to install.
Love this product. Looks great on my Ram truck. The all black looks clean. Easy to install myself. Fast shipping from K2 Motors and the packing was good.
Great product I got open box for only $50 with shipping I got a steal they said a few scratches and yes it has scratches but not as much as I expected definitely reccomend
Steelcraft is the leading manufacturer of truck and SUV accessories since 1998. Starting with designing and building products from cold, hard steel, Steelcraft then produced grille guards and rugged nerf bars.
Nowadays this company develops the most exclusive tubular accessories in the world. What brought Steelcraft to the new level of manufacturing is the cutting-edge design of its products. Being first to deliver a police bar for Dodge Charger to the automotive accessories market, the company has an ability to develop and produce accessories for the newest model vehicles earlier than other manufactures.
Most products that Steelcraft makes are made of premium T-304 stainless steel to provide the highest durability.
They are a sleek, low profile board offering a wide 5″ stepping area. UV resistant and non-slip stepping pads ensure you will safely get in and out of your rig whether rain or shine! iBoard Running Boardss are constructed of 6061 aircraft aluminum which means these bad boys are rust resistant and strong enough to provide you many years of use.
Offered in a brushed polish finish to fit your rides style. APS makes these a solid, one piece design that was inspired by iPhones. APS 5″ Brushed Aluminum iBoard Running Boardss offer a quick and easy installation.
Normally it takes around an hour to have installed. Once installed, get out and show em off! So, what are you waiting for? Get yours today!.
Excellent product from packaging to ease of installation to fit and finish. Product came well packaged. Instructions were straight forward so no guessing games. Installed easy and looks great. Very pleased and would def recommend.
This product is made of high-quality materials to serve you for years to come. It will meet your needs and deliver great quality at an affordable cost.
Rough Country’s new Wheel to Wheel Nerf Steps provide unrelenting style and easier access to your truck. These steps extend from one wheel well opening to the next, offering a clean install that lends to the look of your lifted truck.
These steps can be installed on any vehicle, with or without a body lift. Our innovative design actually hides any exposed frame you see under the truck, offering extra protection for your rocker panels.
Rough Country Nerf Steps are Made out of ultra-durable. 084 Wall corrosion resistant tubing with a Zinc Base Coat and Black Finish for a sharp look that’s ready to withstand the elements.
I bought these for my Silverado and after 1 year they are rusted and chipped! I do minimal to no driving on gravel but have put 18,000 miles on with these and they have continued to chip worse and worse in KS.
I wash my truck and scrub these specifically to keep them clean but the paint is poor on them. Good to know it was a waste. Don’t buy these cheap things!.
Elevate your rig. CAD-designed for a custom-fit on your late-model pickup truck. Wide 4. 5″ step surface is crafted from aircraft-grade extruded aluminum. Stainless steel center panel adds a clean divide between front and rear cab.
Injection-molded textured step platforms withstand rough terrain. Rounded bullnose trim contours your rig for a clean, OE appearance. 2″ black elastomer back splash prevents a build-up of road debris.
Includes all necessary hardware and brackets for rocker mount install. Designed using advanced computer technology, these trend-setting side steps are made with a custom-fit for your late-model pickup truck and feature a rounded bullnose trim that contours to your rig for a sleek, OE appearance.
The extra-wide 4. 5″ stepping surface of your Steelcraft STX300 Running Side Steps is crafted from aircraft-grade extruded aluminum and boasts a 304 stainless steel center panel that adds a clean divide between your front and rear cab step points.
Prepare your rig for rough terrain with Steelcraft STX300 Running Boards. Constructed from durable, yet lightweight extruded aluminum, STX300 Running Boards keep road debris away, offer an easy step-up and upgrade your exterior style with a custom-fit.
These stylish cab-length steps offer a unique look for your vehicle, with two integrated drop steps to help you easily climb into your cab. Each integrated step is fabricated for strength and durability, and features a stamped tread and RC logo for a one-of-a-kind look and feel.
These steel steps offer unrelenting reliability, powder coated black to resist corrosion for a long life of great looks. Each step features a set of mounting brackets with a half” of adjustability to allow you to mount them closer or further from the body for the look and accessibility you prefer.
Looks and fits great! Solid material doesn’t have much ‘bend’ or ‘flex’. They’re a little tucked which personally I liked for the fitment to help take away from looking bulky or sticking out to much.
little bit of a pain to install unless you have a lift. worth every minute. best looking and usable set of steps I’ve ever owned. laid out well. foot pads are nice and big but not awkwardly big. still sporty.
hug the rockers good no gaps. overall a 8 out of 10 ,took 2 points off for install difficulty. engineers could have designed easier bracketry to install. but still these steps are amazing to look at.
Black powdercoat finish. Easier access in and out of the truck. Added protection from road debris. Helps hide exposed frame under vehicle. Works with or without a body lift. Mounting plates offer 1/2-inch adjustability.
Decide on the style of side steps you want for your ram 1500
You will want to decide on the style of side steps for your 1500 ram 1500 that best fit the look of your truck. There are many different styles to choose from, so take your time in deciding which ones you like the best.
Some things you may want to consider are the material the side steps are made of, the color, and the overall design. You will also want to make sure that the side steps you choose are durable and will last for many years to come.
Choose the material you want the side steps to be made out of
The side steps for the Ram 1500 can be made out of either aluminum or steel.
Determine the size of the side steps
The recommended side step size for a Ram 1500 is 8.5 inches.
Choose the color of the side steps
Some people may prefer to have the steps match the color of their Ram 1500, while others may prefer to contrast the colors for a more unique look. Ultimately, it is up to the individual to decide what color they would like to paint the steps of their side steps.
Consider the weight capacity of the side steps
The Ram 1500 Side Steps have a weight capacity of 400 lbs.
Select the installation method for the side steps
There are a few different ways to install side steps on a Ram 1500. One way is to use the factory holes that are already in the frame of the truck. Another way is to drill new holes into the frame of the truck.
Determine the price range for the side steps
The price range for the steps of side steps for ram 1500 is between $100 and $200.
Compare the different side steps available and make your final decision
There are many different side steps available for the Ram 1500. Some are made of plastic, some are made of aluminum, and some are even made of steel. Each has its own advantages and disadvantages.
Plastic side steps are usually the least expensive option, but they can crack and break more easily than other materials. Aluminum side steps are more durable than plastic, but they can still be bent or damaged if you’re not careful.
Steel side steps are the most durable option, but they’re also the most expensive.
So, which side steps should you choose for your Ram 1500 It really depends on your budget and how much abuse you think your truck will suffer. If you’re on a tight budget, plastic side steps may be the way to go.
But if you want something that will last longer and can take a few more bumps and bruises, steel or aluminum side steps may be a better choice.
Conclusion
After months of research and development, we have finally arrived at a conclusion for the side steps for the Ram 1500. We have decided to go with a simple, yet elegant design that will complement the look of the truck while providing a sturdy and reliable step for getting in and out of the cab.
The steps will be made of aluminum and will be available in a variety of colors to match the truck’s paint job. We believe that this is the best option for the Ram 1500 and we hope that you will agree.
