20 Best Screen Protector For Galaxy S10 (2023 Updated)

A great product! First try had no issues and it was easy to install. Time will tell how it holds up but I am already feeling better that I have a nice glass cover to protect my s10+ screen. Have no issues using biometric fingerprint scanner and didn’t even have to turn up the sensitivity.

Highly recommend at a better price point than white dome. EDIT 8/30/21 over 1yr on same protector now The original protector I installed has met the end of its life. While its still doing its job It is time to change it out with the spare that comes with the kit.

I am very surprise how well it has held up and it has protected my screen from a few good drops. Yes it cracked but unlike so many other protectors this one didn’t shatter but just cracked. I have may cracks now and yet they are almost invisible and have not caused any issues or glass in my fingers.

I will definitely buy again in the future.

IT needs to be easier somehow? it is lifetime warranty, so if it holds worth the $ definetely. It is a little intimidating to use,I was really worried about liquid going all over my brand new expensive phone! but we did it and it did not spread around the front camera lens I just went with it.

Since I have no idea on how to do it over by taking it off , I left it on without it covering completing there. I have a good case on it so figure its all good. Overall, I think its a good buy. I would recommend, the fingerprint id works awesome and the new glass screen has the feel of the original phone screen.

If you are waivering about buying it, I would. It could stand to be less costly and a little less initimidating to put on.

I was apprehensive at first because 40 bucks is a lot for something that im most likely going to crack. I’m not very gentle with my phone. I should be knowing it cost a small fortune. Anyways, its easy to use and has very high quality glass.

It’s much thicker than any other protector I’ve bought. I always end up getting a 2 or 3 pack because I end up using the first piece of glass as practice run. Not this time. The tube that has the nano glue stuff.

haha dont know the actually term, but you got me. has just the right amount in it. I’ve had other glues seep out over the edge because they over fill those. But I dont think any got on the absorption pads.

Overall, very high quality materials. Even the packaging. I would recommend this to anyone. Very nice! High five!.

This is the second Armr Suit screen protector I have bought for my Galaxy s10. Just like the first it is impossible to install the shield without air bubbles. I followed both the written and video instructions to the letter and still air bubbles appeared.

The instructions say that these bubbles will go away in a few days. This is not the case. I love the protection the shield provides. It would be perfect except for the air bubbles.

I was kinda worried when I 1st received my protector w just buying a new s10 plus I really didn’t want anything wet on my screen. I actually waited abt a wk b4 applying. the application was easy to do n my screen didn’t get very wet at all.

It had hardened w in 12 hrs n I have no bubbles no streaks n I absolutely love the protection I am getting from it. I wld recommend this product to anyone. I am very happy w my purchase.

So this is my first time writing a review and I recently felt products deserve more of them. I ordered my screen saver for a curved screen took some time and patience with getting it to seal fully but all in all it’s great, I’ve used Armorsuit any many devices over the years and I’ve recommended them to others as well.

The time of my order to arrival was quite soon 3-4 days. Thanks again for my order and I hope you all have a wonderful Christmas.

I know how hard screen savers are to install. I have had my share of failures. I know that basically you have ONE shot to get it right. This product is different from the others. They include the tools you need to do a professional installation.

The protector itself has precision laser-cut tabs that fit over a custom guide that fits YOUR phone. I went online and watched the company’s installation video, then did a dry fitting to make sure I understood how this all worked.

The actual installation was easy and went just like the instructions and the video showed. I had no issues and no bubbles. The screen saver feels good, is easy to clean, and appears to be very scratch and scuff resistant.

This product is superior because of the high quality installation kit that is included. It fits in my OtterBox Defender screenless edition case perfectly. I am very satisfied with this purchase.

I’ve bought Zagg shields since 2012. Overall a great shield, but this one is a little fussy when touching the screen. On my S10 you’re supposed to be able to double tap screen to get it light up and then swipe to open.

40% of the time I can’t get it to light up. Probably due to thickness of shield. Only annoying if I’m in a hurry. Also shield is thicker, so when trying to buy a case (one that only covers back and sides) the case sides often aren’t tall enough with this shield.

If it falls screen first, you’re likely to put cracks in the shield. That said, it’s better than cracks in the phone screen. Customer service with Zagg is #1 in the industry. Called several times over the years and they never disappoint in providing the BEST service and advice.

Getting replacement shields is super easy.

I have used Zagg glass protectors on previous mobiles as I am adept at regularly dropping my phone. They are a good product and saved my screen more than once. Better yet Zagg replaces shattered screens for cost of shipping which I have also needed.

This screen isnt the typical tempered glass. It is some hybrid with is much thinner than glass but has the same feel as glass. I cannot comment on its protection yet but that is just a matter of time.

I am hoping that this performs as well as their other pure glass screen protectors. I installed myself and it was relatively easy. The one thing I didn’t do which I highly recommend is using the dust remover sticky pad.

After wiping with alcohol pad and wiping with shami I looked hard and saw no specks if dust so installed screen. As soon as I put it on there were about 8 bubbles that despite my best effort with the squeegee I could not remove.

I was peeved but blamed myself. After about a week the bubbles disappeared! I dont know what happened but they are all gone. I suspect they may come back but am very happy that they are gone. So buy this but definitely use the sticky pad over entire screen to definitely remove any particles you cannot see well.

In my case the bubbles still disappeared but if I have to replace the protector I would follow ALL the instructions just in case.

This did not adhere well to the curves of the edges of the phone. I ended up having to carefully trim some of it that kept on pulling up. Dust and dirt is starting to gather at the edges. Going to live with it for now and try to apply the second one that came in the package at some point.

The cut-out us not necessary. The protector could be made just for the camera. No rim is required around the flash and sensor as doesn’t stay “stuck” for even the first day. Fortunately it also hasn’t lifted to hook on anything and pull the protector off yet, but suspect it will.

The protector is pretty good. When it’s on, it adds no thickness to the phone giving it the original feel. But, because of the way the backing of the cover is applied, it leaves an annoying line across the bottom of the phone.

I have had other films like this that dont leave any sign that the phone has a cover on.

Olixar Camera protectors given excellent protection to the rear cameras of your phone & sold in twin pack make them good value for money. However make sure you handle with care when applying them to your phone as they can break.

I’ve used several Simple Snap screen protectors. They are the best on the market. Recently I installed a new protector & somehow a large piece of dust got under the cover; I lifted the cover to remove it & it would not attach again.

I wrote to the company & received a prompt reply & a new screen protector. This warranty is for real.

I had selected a cover for my iPhone x. When I installed it. It did not work out. I had bubbles all over the screen and the face ID would not work. I contact Simple Snap because I had register my product.

I got a real fast response wanting to know my issue. I told them what the problem was. They informed me that the one I purchase would not work with the otter box cover. I needed a different one. With being register they told me that they would send me the correct one right away.

They would transfer the warranty and all over on my account from the old one to the new one. They had the new cover out the next day. I would purchase and recommend to everyone to purchase the Simple Snap cover.

The response and support was EXECLENT.

My phone screen is like new. I wiped it down with the included wipes and got a near-perfect fit with the screen protector, but it can’t read my fingerprint. I even tried to reset my fingerprints with the new screen protector, but the system just kept telling me to either clean and dry the fingerprint sensor or to press harder or to cover the entire sensor.

When this screen protector is on my phone, the fingerprint sensor DOES NOT WORK.

Recently received my full edge tempered glass screen for my S10 phone and its a great fit. Received it quickly, directions were clear, and the price was good.

It’s a little large on sides. Sticks out – therefore cracked on top left corner… I don’t think the edges are quite rounded enough.

I received my glass protector on the due date. Its directions were easy to follow, it fit perfectly and I would recommend it to everyone who wants to protect their new Samsung!

The tempered glass came with adhesive on the fingerprint reader portion which will not allow the finger print reader to work. It is complete trash.

It does not stay attached. There is not enough sticky strip to keep it from falling off.

I LOVE the amFilm Screen Protectors, they have kept my screen(s) from cracking on MANY occasions. They dont work so well with the NEW Fingerprint stuff, but I dont use that anyway, AND, these protectors make the Touchscreen controls as simple as NO SCREEN PROTECTOR at all.

The Price is FANTASTIC and very easy to replace and install.

Nice glass protector but not shaped to conform with the contours of the newer Samsung Galaxy S-series screens, which have curved edges. As a result this flat protector has a band around the circumference that is not stuck to the screen.

I blame Samsung (mostly) because I see no need to design a screen which protrudes from the case of the phone and has curved edges. That said, the screen protectors are also to blame because they don’t cover the screen properly.

An easy to apply, high quality tempered glass screen protector that leaves no air bubbles. The guide frame works perfectly. Was an excellent price and I highly recommend to anyone looking for a great screen protector.

Although it is a good product and it’s easy to use it did not come with alcohol wipes to clean the screen, the cloth to wipe the screen after, or the little plastic “bubble preventer” for lack of a better term, to push any air bubbles out for a smooth screen.

Got thing I save mine from a previous purchase as it does help. But I would but again as I have the other materials.

I wanted a screen protector and looked on line for the best ones. This wasn’t cheap but it is really excellent. The Samsung s10 lite has a setting for enhanced screen sensitivity when using a protector so I enabled this and it works perfectly.

Highly recommended – do follow the fitting instructions and you will be as delighted as I am.

I will choose this brand every time now, I’ve had 3 different products from them, they’re great quality and last a long time. MobileFun also has been excellent. Super speedy despatch and cheap postage.

Thanks!.

Mobilefun service was excellent. Fast delivery. Screen protector was very good quality. Well packaged with all the essentials. Easy application with no trouble. Screen quality and touch sensitivity not affected in any way.

No camera cut out, but this does not seem to impact on photo quality. Appears to be durable.

For all my phones I have been using Spigen cases, which are always the best protection. So I decided to buy NeoFlex protector. Installation was not so smooth as on video guide, edges were not glued on the edges, so dust was there right away.

Second time – the same. I throw 30€ away for really bad product.

Great product, easy to install

TranslateShow in original languageEn cuanto a sonido supera las expectativas, logra un buen nivel de sonido y con muy poca distorsión que solo se percibe en volúmenes muy altos. Para conversaciones no la recomiendo mucho, ya que cada que la he usado, mis interlocutores dicen que no me escuchan bien y después de un tiempo dejan de escucharme en definitiva.

Solo la recomiendo como bocina ya que es nitida, potente y muy portatil.

TranslateShow in original languageEstoy muy contento y satisfecho con la compra de esta bocinita. Estoy muy sorprendido con la capacidad de la batería. En un volumen al 50% me ha llegado a durar hasta 6 horas (sin exagerar).

Sin duda vale mucho la pena. Otra vez Xiaomi sorprendiéndonos con su calidad-precio.

As a long time fan and buyer of Ringke cases, I was excited to get this screen protector for my S10+. This was a very easy installation, and it looks very good compared to other film protectors. Orange peel effect is minimal, surface is very smooth for using the touch screen, and most importantly the fingerprint scanner works.

Now for the negative points. This screen protector is just a plastic film that will help minimize scratches on your screen, but it will not protect against falls. I knew this coming in so I can live with that.

The second issue I have is it being advertised as case friendly, and it is not. Maybe with a Ringke case, but I have a Tech21 minimalist case, and the edges keep peeling of. Because of the cheap price and easy install, I would give this a 3.

5.

I have always liked Ringke products and have used their cases and screen protectors on all my devices. This one however doesn’t quite live up to the standard. Its not a terrible screen protector, it fells nice to the touch and installation could not be simpler.

The in-screen fingerprint sensor in the s10+ does also work flawlessly with this screen protector. But because it is a gel type protector, if its hit with something firm (a fingernail for instance), it leaves a somewhat noticeable “dent” in the protector.

Also the corners of the protector tend to peel up, especially with the Ringke FusionX case that i’m using. All and all it not bad, but could be better. And it may work better if you have a different case or do not use a case.

I own an S10 plus and cannot use tempered glass with the finger scanner. This works fine with the in display scanner. The application process is easy, and with the 2 stage stick on it actually removes all the dust when you apply it.

The 2 stage application also allows you to line up the protector as many times as needed before you use the adhesive on the protector. I purchased 5 of these so far. They protect your screen from scratches and barely show and scratches.

They are a glossy gel type as opposed to a “film” which I prefer. Overall these are great for the s10 plus and I highly recommend them. The only downfall is that after a while you need to replace them as they become not as glossy to the touch.

For 17 dollars, ehh pretty overpriced for the quality here but it works I guess. The privacy screen also works as well even on full brightness you can’t really see any text messages if anybody were trying to look, although photos are a bit visible or for example your wallpaper would be on full brightness but on mid to low bright it wouldn’t same goes for text messages or reading something off of an article.

Had this for about 2 weeks, wanted to review this screen after some use instead of saying “it’s amazing” when first time using it because that’s a pointless review. But here are some of the good things about This screen.

Well for one it does have like this kit to help you apply the screen protector perfectly, still it wasn’t a bubble free application and I had to reapply it about 2 times for it to be bubble free, I always start from the bottom then the top end instead of just applying it flat if you know what I mean.

After 2 weeks of use screen already has some scratches from coins to keys being in my pocket, but scratches aren’t that deep. Drop my phone a few times on accident now but I also do have a case on my iPhone so depending on some users might get different results.

The screen protector is very clear, while some other screens with the privacy film would have like this grainy look which I had a screen protector once and it bad to the point I just took it off and threw it away, but this screen protector with the privacy film it’s actually not that bad.

It’s definitely not finger print proof as stated in the description. One MAJOR issue is touch screen response. I’ve had issues sometimes when trying to type some of the keys would not register, or just using the screen in general, you basically have to touch or tap the screen with a bit more pressure, which I am getting use to already, but it is still and issue for me till this day.

Besides that it’s a decent screen protector, but 17 bucks is quite a lot for this type of quality tbh, but still decent. Will update if anything else happens, thanks for reading.