20 Best Muzzle Device For Ar Pistol (2023 Updated)

Perfect fit on my double stack pistol magazines. Easy to install.

Easy way to mark my gun magazines!! Never lose a magazine again!

Great alternative to expensive end plates, hopefully they will survive the Texas heat.

Very nice quality targets – we shot quite a few up over the weekend and I really liked them. Nice heavy paper and the rounds leave precise marks – they don’t tear out to where it’s hard to score. They help up well to being stapled to the cardboard and were easy to take off without tearing the whole corner of the sheet off.

Also easy to write on – some of these have a finish that doesn’t accept ink very well.

Very nice paper. Excellent print quality. Appears to be regulation. Great price. Thank you Domagron

Great Only problem is that once you buy from Domagron, you will never ever cease to receive their emails. They thank you for buying about twenty times. Then they email you to say they are sorry if they did something to offend because you haven’t bought targets again in.

3 weeks. Then they send you those emails to review a product you have bought and reviewed before. I swear I’m afraid I’ll have a visit from the CEO next time I don’t buy anything for one year Targets are good though.

I received my order of safety flags quickly and on time. I was however surprised by how large they are, did not fit into all my long guns. I will use them where they fit. Either I missed the size listing or it was not obvious in the description.

They are well made and solid, so where I can use them they will function as intended.

Ordered these for our collection of AR’S because I didn’t like using the brittle ones that some ranges use. These work well and do their job. They really flag the chamber and show safe. Highly recommend these to anyone who shoots at ranges that require them.

Chamber flag fits many different firearms. Some ranges require them as its an easy way to ensure the chamber is clear. Awesome product.

Hardest thing was to decide whether to mount it horizontally or vertically. Adjustment for fitment of my AR and reprogramming the combination were pretty straightforward – instructions were very explicit.

The only trick was to make sure you drill a full 2 inches into the wall stud to prevent stripping the mounting screws. I didn’t drill the full 2 inch length and stripped one of the mounting screws. I removed a screw that I already installed and drilled the full 2 inches and installed it sliowly this time – not letting the drill jump.

I should have replaced the stripped screw but decided to salvage it by using a flathead driver instead of a phillips and installed it into the hole I removed a screw from – again slowly with a lot of my weight onto the drill/driver.

I recommend not stripping the screw int the first place. If you strip one – don’t take a chance and just purchase a couple of new ones- these are cheap from your local hardware store. This is the only option (aside from a full size rifle safe) that secures an AR15 but have the option of storing it loaded (not recommended) and with the bolt closed with a magazine fitted.

For the way I like to store my AR (action closed, magazine fitted and chamber empty) this is perfect. The ghostedskull vinyl sticker included was a nice touch. Really love this safe. The industrial grade combination lock (no keys or batteries ever needed) works flawlessly- just fantastic not having to be concerned with keys or keeping an eye on the battery life -lest you lose access at an inopportune time.

Excellent company – they figured an affordable way to secure an AR with however way the owner wants.

Third purchase from this company and quite happy. Shotlock safe is a great gadget. It will never stop a burglar who has come with intent, but what will? It is mounted next to my front door and covered with a kimono.

It will stop walk in thieves, smash and grab burglars and children and guests.

Very good. Quality materials, reliable combination lock mechanism, very secure. Fills a badly needed niche combining secure storage with rapid access. I would definitely recommend it to anyone with an AR platform firearm.

I am a mostly spot and stalk hunter, mostly with a bow but sometimes with the ol rifle. I have had a few bino harnesses over the years. From the very basic that just wrap around your back and clip onto the binos, to several bino “pouches”.

I bought these after hearing about them on social media and then doing some research. I also bought a range finder pouch to go along with the bino harness. I have taken them on several whitetail hunts and most recently a nilgai hunt here in Texas.

I covered 8+ miles a day on the 4 days we hunted nilgai. The harness carried the binos firmly and securely as I crawled through the south Texas brush, but they were right there at the ready when I needed them.

I love the soft plush inside of the bino pouch so you can quietly slide the back in the pouch totally unheard by any game around. As a former veteran and LEO I love being able to support my brothers too! Awesome product and would totally recommend the bino harness and range finder pouch to anyone looking to purchase one.

Bino pro pack- works as it should but with 2 issues. First the lid should be able to fold in half in up position, so that you can access you bino’s quickly without messing with the lid or keeping them on top of the bino pack (which works for me since it folds flat and I don’t have anything stored on bottom of the pack).

Maybe a foldable magnet style like the Sitka brand. Rangefinder pouch- works as it should but the strap isn’t tight enough and I end up folding it back into the right mesh pocket for quick aCcess. It works well.

Rangefinder tether- this piece needs to be fixed and I hate it. Clip clacks against your rangefinder and the clip the secures the tether to the pouch doesn’t close. It was open with about a mm of space.

Which was lost in the woods the first time I unclipped it after following a blood trail. That clip needs to close. Terrible design. So much that I thought I got a defective one. Bino strap pads. Work great and as should.

I had (2) other harnesses that were very good, quality, harnesses, but they had shortcomings that were too hard to ignore. Thus began my journey to find a better harness and I finally landed on this one.

I used it this whole hunting season (I’m a bow hunter) and really like this harness. I LOVE, LOVE, LOVE the little dog-ear pockets for mouth calls – one of my favorite features. Those pockets, the slim profile, the quiet, simple closure method, the back pocket, the flat, non-padded straps that don’t interfere with backpack straps, and the quality materials all combine to make a great harness.

Also, very importantly, the rangefinder pouch is mounted low so it doesn’t interfere with access to the windicator bottle (don’t overlook this important detail). Not sure if I’ll ever use the MOLLE attachment on the bottom, but it’s a pretty cool feature that some will love.

Yes, it doesn’t fully encase your binoculars, but even plowing through the THICK wood in the Pacific NW, I didn’t have any debris issues or dirty binos. Originally, I was pretty set on getting a harness that opened outward because it seemed to be a no-brainer better design, but I’ve come to realize that those have drawbacks too and nobody making that style have anywhere close to the options this harness has.

There are (2) things that could be better about this harness: 1) The soft material on the inside of the harness and rangefinder is great for quietness, but it grabs on the rubber coating on my binos and rangefinder so they tend to get stuck about 4/5ths of the way in, requiring some fidgeting.

2) The back pocket is too small for a phone. If they made that pocket big enough for a phone to easily slide into and fixed the ‘grabbing’ issue, this would be the PERFECT harness IMO. Still an EXCELLENT harness with lots of thoughtful features.

It’s a keeper for me and I’m pretty picky.

First off this is a great turkey choke for beretta /benelli shotguns. People are saying they will not fit there shot guns. Just do some research before you nock this product and you will find out primos does make the choke in the optima and the Mobil choke tubes and yes beretta uses both of these tubes in different shotguns and that is why they work in some and not the others I think Cabela’s is offering the Mobil choke tube model and they should put In description so it would be less confusing.

I am not sure if they just carry the Mobil or if they can get the optima choke tube as well. It’s always best to call if your not sure about which tube to buy. I do know that they do make both models for the beretta / benelli shotguns.

And they do work great in them. I have pattern my beretta with 4 different types of turkey shotgun loads in 5 shot and all my shells shot awesome patterns with the jelly head choke tube. I can even shoot a good pattern at 50 yards which is way more than enough range to kill a turkey! So my suggestion if you want a good turkey choke this is it and also do a little research and find the one that works with your shotgun thanks.

I read some reviews about this choke and wanted to try it. Being that turkey season was in full swing, they were a little hard to find ” on the shelf “. Searching on line, I found a store in my general area that had some in stock the model indicated ” beretta/bennelli”.

After I picked up the choke, I discovered that it would not fit my Beretta extreme II. Now if a guy owns a few different Beretta’s, he might know the difference. I only own the extreme II, and as my x-wife would say ; ” I’m not always a deep thinker ” so did not realize that different models required different chokes.

Like I said, the choke was identified as ” beretta/bennelli “. I did manage to return the choke to the store for a refund. I contacted Primos by email to explain the problem, I also explained that I had wasted 3 hours of my time going to pick up the wrong choke.

I suggested that they should correct their labelling or have their distributors specify which guns their choke will fit. ” Bubba ” from Primos replied, ” yeah we have chokes for the extreme II “. That was it, no ” sorry that you wasted 3 hours of your time.

“. No ” thanks for the suggestion and we’ll look into the problem. ” or anything. My follow up email was a bit more “direct but polite “. It remains unanswered. I realize that Primos has a lot of products on the market.

Seeing their lack of follow up, I’ll be a bit more cautious before trying their other products. Is the ” JellyHead ” a good choke ?. I don’t know, I never got a chance to try it. Now I’m not sure that I’ll bother ordering one for my extreme II.

I hope this review can help someone else avoid the mix up that I have had. Thanks.

Tried and true. My daughter took her fourth turkey with a Remington 870 20ga 2 3/4” 4 shot at 32 yards very impressive the pattern this choke holds at that distance. Other chokes I could only pattern to 25 yards for good clean killing patterns Jelly Head patterned well to 35 and could have been farther.

With my daughters closer is always better. Take the time to call them in close even if it takes another day. No better way to spend time than in the woods.

Fantastic little shooter. Has the weight and feel of a real AR. Everything works just like the real deal including the bolt locking back when empty. Rapid loader works great as well. Of course it would be fun to have more than 25 rounds but man what fun for those 25.

I bought this for me and my daughter and it’s everything you’d want it to be. Put on the red dot and it was spot on from the beginning, no sighting in required, for mine at least. The fact that it works like an actual AR is good for training my daughter for the real thing.

She has one in 22 but cant shoot that in the back yard.

if it worked as it is supposed to, it would have been just ok. Only half of it works only one of the 2 cO2’s ports are functional. and when you change the co2’s one shoots all the pressure out that still in it because it doesn’t let the co2 get into the gun.

Junk and was very expensive also. what a disappointment.

The auto loader jams bb inside spring rendering it useless. Should have a better loading system for the price

For what you pay. Should have a barrel nut wrench that fits most hand guards now days. 1 1/4. And some tools I will never use. Should offer other sets were we do not have to buy normal tools most people already have.

Like the Torque wrench. Go with a cheeper kit. More then what you need for ar-15 build.

A truly top-notch armorer’s kit that has every tool you need to build a complete AR rifle (upper and lower). The best part about the kit is the stand. Every component is high quality. If you are looking for a complete kit at a fair price (for what you get), I recommend the Wheeler’s Armorer’s Professional Kit.

I bought this package to build my very first AR-15. As a kit, this thing has almost everything you need to complete an excellent AR. That being said, I would make a couple of suggestions to the manufacturer to make this package absolutely the greatest single tool for the garage gunsmith: 1.

Ditch the Torque Wrench, it really serves no good purpose and I for one already had a much better one; 2. Add a small hammer and some roll punches to replace the torque wrench; and finally get rid of the strap wrench, it served no purpose for me.

Of course, other amateur gunsmiths may have had the punches and not the torque wrench, but I know when I started my build I didn’t have access to any of my other tools (moving) so it would have done me much better to have the punches in this kit.

Bottom line, if you are looking for an excellent setup to build/gunsmith your AR’s this is an excellent choice.

This is a great call. A couple of grunts and a few minutes later I had a buck walk out right in front of me. Easy to use and durable

I grunted in a doe with it, with absolutely no idea on how to use it save for what was written on the package. Would be nice if it had a lanyard on it so it’d be easier to carry

Works pretty good. Seems to be of good quality manufacture

MORE ITEMS NEEDED. WILL ORDER LATER👽

Outstanding service and workmanship.

This part is for a John Deere Gator and is far more reasonably priced than John Deere. Customer service was great, shipping prompt and the part was the correct one.

Have not installed yet, nice color instructions and packaged very well

Good product for the money. Big Gun could give some more details as far as custom tuning. It is very vague and unclear for beginners to tuning.

Watched a few reviews of this product before purchasing and they were all right. this thing is awesome. I’ve SI muzzle devices on all of my AR’s now and switching the Oppressor between them is a breeze.

Drastically reduces concussion but keeps some of the benefits of a brake. Plus it looks really good 👍.

The product is a quality piece. I did have to modify my rail by removing a centimeter on the end to allow for the push and lock action when attaching the Oppressor. I am not new to little required modifications.

In the end it all worked out nicely.

This flash suppressor is not only from one of the very best manufacturers, but it to be had (here) at an unbeatable price! The description says that it is not “coated”, but it is-and comes with a good crush washer (which similar items costing more $s do not).

You can’t go wrong with this mil. spec. , “top drawer” addition for your rifle!.

EXACTLY as described, and shipped FAST, Love the speed of shipping and communication from SG…

This is the A2, with a solid bottom to direct most of the flash and gas upwards and probably reduce muzzle jump, however there was no washer provided with it so then you have to look for those. .

This muzzle break what it says it does. Felt recoil is virtually gone. Flash suppression is also almost zero. However, I do not recommend this for anything less than 18”. The concussion felt by the shooter is teeth jarring and makes for an unpleasant shooting experience.

Would I buy this again? No.

Built 6.5 Creedmoor for friend. This was the last addition. Glad I did. He loves it. Joe Bibs was great. Quick to deliver exactly what I ordered.

Very little recoil ,no muzzle jump . Very quick recovery for second shot . I have 2 of these on my rifles love both of them.

Straight forward experience. Nothing to complain about. Spice was also the only place to have a green radian (this is how I found them) and went for it. All I can say is I wasn’t sure about buying here but did.

And you can too. It’s a legitimate site and I’m leaving this review to encourage others to buy what they are looking for, right here at spice tac. The charging handle I ordered was what I got and it came in a timely fashion.

I don’t think I need to leave a review on the radian CH itself but it’s my 3rd one. I’m sure there are others that are great. And perhaps you don’t NEED an upgraded CH, but this is by far one of the best on the market, if not thee best.

If Spice tac has something you need, in stock. Go for it!.

Hands down the best charging handle I have ever used. But admittedly that is not saying much as my experience is limited just to the mil-spec and various BCM charging handles. One major aspect that sets this apart from other handles is that the Raptor does not rely on an inherently small latch which is largely surrounded by the handle body.

The problem with this (here’s to you BCM) is that when engaged, there is the potential that the operator may inadvertently pinch his/her finger in-between the latch and handle body. Because of this, hand placement becomes even more important.

I know, I know, it’s a training issue – get over it. Still worth noting nonetheless. Instead, the Raptor implements 2 large wings for its latches and was designed in such a way that prevents impingement with the operator’s hands and can be activated with gross motor skills.

Definitely a smooth operating handle that can be activated with a variety of hand gestures. Lastly (for the goods), the fit and finish is impeccable ─ what you’d expect from Radian (formerly AXTS). The only gripe I have with this handle is that the right latch is wobbly.

When taken off the rifle, there is quite a bit of vertical play but only when forced. When installed and freed from spring tension of the opposite side that latches into the receiver cutout, the right latch will jiggle with movement of the weapon system.

Not a huge deal, just an observation. Huge fan of Radian and what they do, will be purchasing more of their products long into the future.

I Was looking for these very desired items in various other places, to no avail! And I came upon them here at Spice Tac just exactly what I was looking for! everywhere else I went too was out and on backorder, bummer man! I was very surprised and extremely excited to find it here, so ordered it, one place told me it would take a few months I get my items, But Spice Tac not only had exactly what I needed the service was outstanding, and fast, very profesional! I would most definitely continue to look for my tactical needs here! Thanks Family.

was looking for a good muzzle device for my ZPAP M90 and looked at a few then read some reviews and purchased the JComp v2. it not only looks good on the rifle, it performs it’s job flawlessly. almost no muzzle rise.

able to reaquire targets micro seconds aftr shots. Highly recommend.

The JComp along with an adjustable piston, turned my AKs action into a sewing machine. The impulse is so soft and the brake makes it shoot flat. Used a Viton O ring to eliminate wobble. Had to re zero elevation because the brake is so effective it made it shoot low.

The stock muzzle brake wasn’t the best. This Strike Industries J-Comp gets the job done. Firearm is much more controllable. It’s much easier to stay on target.

Works pretty good ! It closed my groups from hand size too fist size at 75 yards !!! Easy to use just get a good even seat all away round and your good to go. Didn’t help as much with the others but it did improve them.

Anything that makes them better is great glad i got it !!!.

I bought the right product for the wrong project by mistake. So I haven’t had a chance to use it yet. However, I do like the design and the simplicity of the tool. It’s a bit heavy but feels and looks durable.

Worked as described. The first few seconds of hitting the drill trigger showed me how out of square my “expensive” upper was, the next 3 minutes made it square. I really is that easy. DO NOT SPEND TOO MUCH TIME LAPPING, It only takes moments, stop when you get a conolete circle of silver and DO NOT use the drill’s fastest setting.

Not too much lapping media is needed either, just use a Q-tip to cover the lapping part of the tool.