20 Best Kitchen Faucet With Separate Sprayer (2023 Updated)

Little issues with this faucet, one, the main nozzle was cross threaded at the base causing it to be off kilter. Secondly, the water that sprays out of the faucet also has a misting cone around the stream causing overspray, which is annoying.

The cross thread issue I easily repaired, the overspray I couldnt fix. Otherwise, we really like the faucet.

This faucet is exactly what we were looking for. Very easy install and it looks great! It has a beautiful finish, easy to keep spot free. The sprayer and the faucet handle work so smoothly. Great Moen quality!.

Looks great. Had a small problem by, but they fixed it right then . Great people to buy from. Would buy again from them.

This is a beautiful set. Easy installation. One draw back is when using the sprayer with hot water it gets extremely hot unbearable to hold handle. Same goes for the cold water, uncomfortable to hold sprayer when it gets really cold.

I wish there was something to slip over the sprayer so it’s comfortable when using.

This faucet was almost the only configuration, with the addition of a soap dispenser, that would replace the existing voids in my kitchen sink. Design-wise I have a few small issues. The hand-held sprayer does get uncomfortably hot when using only hot water.

The design itself is a little clunky/clumsy, and the notched taps are a bit hard to clean. Overall, it does the trick and I would buy it again.

It’s been installed about a month now, and no complaints. At first the design seems very bold or odd, but once it’s been there awhile, you realize how nice and functional it is. The sprayer has good pressure, and i love how far it extends out.

We have a farm sink and were miserable with the shorter faucet. Simple design and very cool/distinctive/industrial looking.

The overall quality of the Faucet feels solid , Brass has some nice weight feels solid. During install I found cross handles were not secured to the stem by any hardware just a dab of some tacky glue.

So unless the faucet was some other customers return but checking the schematics it did not show any hardware that properly secures the handles to the stem. The current way it was shipped would not allow me to open / close faucet properly without handle spinning all around amid other handle would not open faucet at all.

I didn’t feel like replacing the faucet because of the turn around time , In process of moving , I epoxied the Handles so the faucet is usable.

Ordered this faucet about a week ago, just regular free shipping. Got here in great shape, very well built faucet. Took about 30 min to install. Of course I already had the other taken out in prep for this one.

I would definitely recommend this one to anyone. Great delivery, well built and easy install. What more could a person ask for.

After much searching and deliberation, we purchased this faucet in polished brass and installed it on a white cast iron Kohler triple basin sink resting on our new serpentine countertops. The classic styling and gleaming brass finish make a very dramatic statement backed up against the greenish-black stone.

To cover the center hole on the sink, I made custom serpentine plates for both the faucet and the sprayer from the stone we had left over from the countertops. That raised the faucet and sprayer about 5/8 of an inch and really set them off from the enamel sink surface.

We’re still working on the cabinets, so I don’t have any photos to show you, but the final results should be stunning. It would be nice if Kingston offered a matching plate to cover the center holes on three or four hole sinks.

Other than that, they seem to have done an amazing job on the design and production of this faucet. Since I’m the general contractor/grunt laborer on this project, I looked everything over very carefully when it arrived.

The finish appears flawless and the pieces all fit together very well. They even included two extra set screws for the handles in case you misplace the originals. The only problem I saw was that the aerator screens were pulled out a bit from the spout housing.

I pushed them back in place, but called Kingston to see about a replacement in case the repair didn’t work (it actually did). Once I provided the order number for the faucet purchase, Kingston said “no problem, we’ll send you another aerator assembly.

” It’s been over a week and it still hasn’t arrived, but I think the shipping is delayed because the polished brass aerator is a special order. Overall, I’m pleased with Kingston’s response and handling of the service issue.

The installation was pretty straightforward, with solid connections and good seals. Make sure you have long enough supply hoses because the faucet connections are pretty short. Once installed, the sprayer worked great and everything shuts off cleanly after a short break-in period where we had a few slow drips.

Now everything’s sealed up and the faucet valves appear to be working perfectly. The water volume is better than our old faucet and comes on full force with only a quarter turn of the handles. The long drop to the sink takes a bit of getting used to, but the tradeoff is plenty of room to place pots under the spout for filling.

Just be careful not to drop the sprayer head, because it is solid brass and very heavy compared to the usual plastic model you find on most other faucets. In fact, the entire faucet assemble is solid heavy brass and feels like a much more expensive unit.

It’s still not cheap, but you definitely get your money’s worth when it comes to the look and feel of this faucet. We’ve only run this faucet for a short time, so I don’t know how the prolonged function and durability will be.

I took the cold supply handle and valve assembly apart during the initial break in period and found that Kingston uses a canister valve system similar to a standard ball valve. I checked the valve for debris and blew it out before reassembly.

That cleared up the slow drip problem. Be sure to follow the manufacture’s requirement to flush both supply lines before installation or you could void the valve warranty and clog everything up; these are pretty precise valve mechanisms.

Maintenance on this faucet looks pretty simple, and I don’t anticipate any major problems that can’t be fixed by dropping in a new valve cartridge or aerator assembly. The bottom line, this faucet and sprayer combination is very well built and looks fantastic.

It’s imposing, so look carefully at the size before buying. For the money, I don’t think you can find a more classically-styled, beautifully-constructed faucet/sprayer set that matches the solid, heavy feel of the Kingston KS1775ALBS.

If you like the way it looks in the pictures, wait until you hold it in your hands.

Delta faucets are typically pretty rock-solid. They aren’t necessarily super high-end but a good, dependable faucet that rarely gives any problems in use. This faucet is fairly typical of that standard, but there are a few idiosyncrasies with this particular model that I don’t particularly care for.

Keep in mind that in the grand scheme of things these are “nit-picky” items, but I would probably pick a different model were I to do this over: * The radius of the faucet is smaller than other versions of the faucet.

This means the distance from the base to the water outlet is a bit smaller than the version I was replacing. That shortened distance decreases the reach of the faucet, and things I could easily wash before now require more manipulation under the facet to rinse (and I get more water around the sink than in it!).

* The valves do not have a lot of adjustment between “on” and “off”. meaning that you open the facet valve almost half way before water starts to run, and there isn’t much difference between when water starts to run and when it’s running full-open.

All in all, it feels like about 1/3 of the travel is actually useful, making it difficult to adjust temperature. * Flow rate seems overly-restricted compared to the previous model of Delta faucet. I’m sure it’s an environmental requirement (either current or future) that they are satisfying, but it’s noticeable and degrades the performance of the faucet a bit as a result.

I give this unit 3 starts because it’s not *bad*, but it’s not fantastic, either. It works, and does the job as advertised. There are other units out there that perform better at similar-to-slightly-higher price.

I don’t dislike it enough to replace it, but knowing what I know now, I would go a different route.

The first one I ordered had bad valves in the sprayer and handles. I got a plumber to check it out and that is what he told me. I tried to go to Delta about what might be wrong with it and they wanted pictures of it.

So much for their help. The second one seems to be okay for now, If it starts leaking from the sprayer and clunking when I turn on the water it will go back, too. Other than that, I like the way it looks.

I wanted to stick to a name brand like Delta because eventually I would need to buy washers for it and it’s much easier to have a famous brand. This seemed to be the cheapest name brand faucet that still looks simple and classic.

I went with the Stainless Steel model. I noticed that Home Depot has a similar faucet with slightly different handles for about the same price but I think they do this on purpose so you can’t price compare.

Pro tip: when you buy the hoses for it, make sure that you know whether your shutoff valve is a compression or flare type. Most things seem to be compression now days but in our house, everything is flare and it seems to be the more rare type of connection.

All worked well here but there are two annoying things I found: 1. You HAVE to do all the connections in the bottom of the sink and can’t make any of them before you put it in. Why? because the locknuts that hold this in place are too small to fit over the water connection.

I wrapped teflon tape, and made very good connections but then when I went to put the locknuts, it didn’t work so I had to undo everything, remove the teflon tape, put it back on the sink, put the locknuts on, and THEN do the water connections in a tight spot.

2. The sprayer feels very cheap.

I would not buy this product ever again. Works well until it doesn’t. First issue was reduced flow. Then came the inability to stop the faucet from leaking even when sensor was turned off. I am quite handy, so I opened up the electronic control box to see if I could remove any debris, only to find the diaphragm disintegrated.

I looked for replacement diaphragm without luck. Then looked for a control box without luck, except on Kohler’s website, where the price was listed at higher than I paid for the faucet. No way was I going to pay that much for a simple plastic part that cost under $60 for comparable Glacier Bay model.

I started looking for a simple adapter to bypass the control box and use the faucet manually. Guess what, the connections are designed in a way that does not fit any standard fittings, so you are stuck with their $300 replacement part, which costs more than a brand new faucet.

Do not waste your money on this product. Get a supported brand such as Glacier Bay. The valve box is essentially the same quality and the faucet more or less the same as well. Too bad the electrical connections do not fit, otherwise I would have already swapped out the box for the Glacier Bay equivalent.

Stay away from this unsorpotted product. Mine lasted only about a year. My manual faucet worked for over 10 years before I swapped it out for this electronic POT. I wanted to go tougchless to maintain a clean look from kids handling the faucet all the time.

That in the end was a mistake, because I will be swapping back to manual faucet in the end.

Setra faucet itself is beautiful: love that the magnetic sprayer snaps back into place, nice swivel spout, and the soap dispenser is a plus (though built to be super loose). Unfortunately, the faucet does not actually function well.

Not sure why others have not mentioned this in past reviews, though maybe Kohler recently changed their product design. But the water pressure is extremely low (pencil-thin stream). A plumber installed the faucet and we immediately saw leaks in not only the valve located in the handle, but also in the supply lines.

My plumber was able to stop the leaks, but then we noticed a severe lack in water pressure even when handle turned up to max. We thought it could be the valve or sprayer head – which Kohler sent us replacements for both but neither worked.

I ended up purchasing a full 2nd faucet thinking mine was just faulty. Still same issue…. Plumber ultimately discovered it was a problem with the part highlighted in the photo attached. The faucet is manufactured in a way that the hole in the supply line to sprayer head is very small, which does not allow for water to come out more than a thin stream.

Spent a lot of money on a plumber for what will be 3 faucet installations, I am not happy. Will be returning BOTH faucets and purchasing another brand.

Great looking faucet, clean lines. Kohler solid construction. The touchless feature is fantastic. You have to leave the handle open/on then use the touchless to stop the flow otherwise you cannot turn the flow back on the next time you want to use it.

This is hard to remember at first and is the only challenge. Also whatever flow level you last used prior to touchless shutoff is the same flow of water at the next use. So increasing/decreasing or changing from cold to hot requires you to touch the handle.

Just some nuances to consider. But for the quick rinse or washing of the hands, I use touchless everytime and it is greatly convenient. So worth it!.

This is an excellent sprayer. Our previous sprayer was made by a high end company, Concinnity, and the finish began to come off shortly after we bought it; after that, the hose punctured even though we are carefuwith our things.

Then the lever snapped on it. I was a bit hesitant to go with ‘Kingston’ because I’d never heard of it before. However, the price was extremely reasonable so we thought we’d give it a try. On taking the sprayer out of the box, we were immediately impressed with its quality.

It is heavier than other sprayers I’d used, and we could tell right away that the hose was made of a more durable quality than that used by other sprayer manufacturers. The installation was a breeze; the hardware included was also of very good quality.

And it sprays like a dream. All in all, we highly recommend this product! Buy with confidence!.

I bought the oil rubbed bronze for my kitchen sink. This sprayer functions fine. However, I have two complaints about the design. 1. The main body is brass, but the spray lever is actually just black plastic.

It feels and looks a bit flimsy and I hope it doesn’t fade or crack eventually. The good news is the sprayer is heavy enough to sit firmly in the cradle. The bad news is don’t let it drop in the sink because it will probably chip or crack a fireclay sink! 2.

The way the pistol sits in the cradle causes the finish to rub off on the top of the cradle, so I can already see the brass showing through the upper holder rim after just a few months. Lastly, it would be nice if the sprayer had a volume control.

I had to turn the water supply valve down to about half to keep the sprayer water from ricochet spraying everything on my island.

I was expecting a totally metal sprayer and this sprayer has a plastic lever.

hello! i am being honest in saying when i received this item, i was procrastinating installing it due to my luck with plumbing (it wasn’t good luck). suffice to say, this product made that go away as it was so simple to setup and use.

First, I wanted to address the simple look and design of the faucet. the main spout is high enough so you can get good clearance on those dishes below, or that tall pitcher you want to fill. the brushed metal is not too fancy or too dull; just the right amount of glam.

it didn’t feel cheap and definitely should stand the test of time in our kitchen (with 2 little ones, we will get its money’s worth!). Second, the install really only required a wrench, which i didn’t really have to use on the faucet itself, just the water hookups to tighten them.

the hardest part was just to remove my old faucet, as it has seen many many years. i only counted 6 steps in the install of the new faucet and really took only less than half an hour to set up. Lastly, the muted elegance of the new faucet gave our sink area a nice cosmetic makeover.

it is not hard to notice but it doesn’t give off too much of an aura of fancy either. it looks just right. the seperate hot-cold valves and the spray hose all work together in harmony and no extra tools or accessories were required to make it function.

Overall, highly recommended product from Pfister. i will definitely look more into their realm of products.

I own several rental properties and over the years have tried a lot of faucet brands. Pfister is clear favorite because of timeless design, ease of installation and durability. The Courant 2-Handle Bridge Kitchen Faucet with Side Spray is another great Pfister product.

I needed to replace the faucet in my workshop and wanted something high enough I could fit buckets underneath. This faucet is exactly what I needed. It’s versatile with the high neck and the side spray attachment and the finish and design are classic and would work with a wide variety of kitchen styles.

Installation was a breeze, though I will caution that I’ve installed a lot of faucets over the years. However, this is one of my easiest installs to-date. Everything fit with no need for adjustments, and it took me less than a half hour including removing the prior faucet.

I know from experience this attractive faucet will last me for many years to come. I highly recommend the Courant Kitchen Faucet as well as all of Pfister’s plumbing products.

While this faucet is good looking, it is only surface looks. That the plumbing guts are brass is good but based on the price paid ($250+) there are shortcomings. The sprayer body is plastic, so I’m not sure how long it will last.

The spout is aimed forward, not directly down into the sink, so there is some unwelcome splashing of water toward the user. Finally, when first installed, water did not immediately shut off – it dripped for 2 -3 seconds.

After a few days of use, this stopped – water shut off immediately. But after several weeks of use, the water now continues to drip for several seconds after shutting off. Apparently, the cartridge included is not of a high quality.

Love the look of this. Installed by my contractor so I cannot comment on the level of difficulty of that part. I was so happy when my old chrome faucet finally died – I’ve wanted one like this for years.

The spryer button position is a bit odd – works from underneath instead on the top/back. It just takes a little getting used to. And you had the best price and fastest shipping. Great service.

Installation was much easier than other faucets that I have previously installed. That was important for me at my age since it isn’t as easy as it used to be to splay out under the sink. I did find an issue with the handle catching on something in the base of the unit, however.

After finding a parts diagram, I was able to remove a set screw and firmly push down on the part below the handle until it clicked into place. Handle works smoothly now.

Still in the box. Awaiting new kitchen redo. Very clean lines.UPDATE. Installed. looks very nice. Works great. Easy to aim. Love the spray feature.

This ORB has warm undertones showing. Controls are easy to use and the pull down and retract feature works well.

I liked the design, and it installed with no problem. Unfortunately, an hour after the installation, it started to leak from where the aerator end goes on. Wouldn’t stop, no matter what we did. Water spraying everywhere or running down the faucet arm onto the counter in back.

I will be returning it when I can get back to the store.

price was good; delivery quick. I needed it to replace the swivel nozzle arm on my original equipment faucet. It was leaking due to a recent appearance of a flaw in manufacture which covered with chrome a casing void.

The faucet was true to the earlier design differing only in teflon seals replacing the original O-rings. Part taken from the replacement faucet fit the original base and my sink was operational with little effort and little investment.

Thanks.

Great budget tap definately worth the money for a basic tap. Changed out my old one as it was leaking and old. This one definately worked a lot better and water tasted cleaner. Easy installation and looks good.

Top of the line kitchen facet! Very fast shipment! Neatly packaged! Definatly would buy from again!

Cheapest Chinese design and materials that are serviceable. If your goal is a working faucet that will last for several years, has replacement parts available and is cheap, this is your faucet. If you want traditional Delta quality and an appliance that lasts the life of your kitchen, spend more and get an American-made quality product.

i was tired of replacing my glacier bay faucets at my apartment complex. THought I would pay a bit more and go Moen or Delta. Bought this delta ..open box for half of retail. Looks great works great.

Value priced but attractive kitchen faucet. Bought 2 of them..one for the upstairs kitchen and one downstairs. Wide swivel on faucet from side to side covering my double basin. Taps not too big.

If you want a quality kitchen faucet without taking out a second mortgage on your house, this is for you. Easy installation.

I wanted a high neck faucet with one handle and this fit the bill. We have had it for 2 years and now we are having a problem with the sprayer. Several times the faucet sprayer would not turn off. Yesterday, it stayed on for 5+ seconds.

Finally clicked off after getting soaked as well as floor. Not a good situation for seniors. Planned on “growing old” with this product.

We have been loving this faucet! We had a plumber install it, and it has been working great! I love how high it is, since you can get water even with a sink full of dishes. We have had it for a couple of months, and no problems so far!.

Beautiful faucet that is easy to use. We use plumbers for such installs so can’t take credit on install. Tenant is very happy!

I took along time to make a decision. I an happy with this faucet. It was easy to install. One thing to understand about all new faucet. They are water savers. Therefore, they restrict the water and you might experience a drop in pressure.

I did. The water pressure in my area of town is low anyway. It seemed to affect the cold side more. Anyway, after you use it a while, unscrew the aerator on the end of the faucet and clean out the screen.

Be careful when you screw the tip back on. Do not get it cross threaded. Take your time. Good luck!.

I like this faucet, it looks good it works fine. But the sprayer head started leaking after only 2 years and you can’t find a replacement for just the head. You have to buy the whole assembly for $66 and crawl under the sink to replace it.

Wasteful.

Faucet is really wonderful quality and looks nicer than the photo!!! We’re very happy with it. Our plumber agreed that is a high quality item.

I bought this for our kitchen remodel. It looks great but the water flow seems to be restricted. If I take the nozzle off, the water pressure is amazing. It was like this from day one, so I know it wasn’t a build up of minerals slowing the output.

Perhaps some water conservation measures were taken when designed? I’m all for conserving water but it takes several minutes to fill a sink of water which I find to be frustrating.

Love the look of this faucet however it has some flaws that in hindsight would have made me steer clear. Out of the box it looks solid but some washers were missing. Went to the store and picked some up and installed the faucet.

Seemed fine but then the hose started leaking. After determining it wasn’t the fitting, headed back to the store to get a new hose. Finally the thing doesn’t leak and seems to function ok but the neck moves quite a bit when you pull the spray out and retract it.

The base is secured tight so it’s not going anywhere but not sure if the loose neck will cause issues over time. I keep checking for leaks but so far so good. Fingers crossed this faucet will last. It looks pretty but the quality is clearly lacking.

I specify fixtures for my job so this was kind of a test run to see if could recommend it to my clients. Sad to say I would not be able to based on my experience.

Very happy with the look and feel. Came very nicely packaged and pretty easy install. One suggestion is to add where rubber washer goes to directions. After trial and error, I figured out to add washer to the weighted pull down hose (between the two connections once threaded through the counter top.

Also, good pressure when rinsing but low pressure in normal setting. Wife says she can live with it. Overall very happy with the purchase.

This is the second kitchen where I’ve used this faucet. It is a beautiful piece and adds such an amazing look to a kitchen. The craftsmanship is excellent, the side spray works great, and the function works well.

I love how the neck of the faucet moves, so you don’t always have to use the side spray. Additionally the side spray doesn’t have any plastic component showing where I’ve seen some sprays have a plastic handle piece which takes away from the elegance.

I love this faucet! I got the nickel finish and it is simply beautiful!! However with all that beauty comes a little weight. it is heavy. The sprayer in particular is pretty heavy. The only other thing I suggest is that you have your plumber double check the placement of the holes for the fixture.

Mine are very evenly spaced however that puts the sprayer right at the edge of the cold water handle. Actually they bump into each other. My solution has been to turn the sprayer nozzle to the back of the sink when I return it (and make sure it is straight back) so they wont bump into each other.

It also has a tendency to drip which has really surprised me! Haven’t figured out that solution yet! Also be very careful if you lay your dishcloth across the faucet, I think mine may have had a little bleach in it and it very slightly pitted the finish in spots.

:-(.

First impression, the brushed nickel was a bit shinier than expected. After coming to terms with that and ordering drawer pulls accordingly, I was able to move back to being impressed by the overall build of the faucet.

I really liked the weight of the faucet. And, what makes it standout from other “French styled” bridge faucets, were its unique handles. I only wish I could find a sink drainer that matches the same sort of pull design.

Beautiful faucet however sent with a part missing. By the the me the contractor was ready to install and noticed the part was missing it was past the 30 day time frame. Customer service for both Houzz and the manufacturer would not honor the replacement piece nor would they honor the covered pet under warranty.

A $300 faucet x2 I ordered and I cannot get the piece replaced ordered it delivered as they will not sell the part alone. What a mess.

I had previously purchased 2 Kingston Brass faucets for our double vanity in our master bathroom. I was impressed with the quality and so I purchased this one for our kitchen sink. Again the quality was superb! These faucets are heavy duty solid with an elegant finish.

I expect they will all last a very long time. During the first year, this faucet developed a drip. I realized that this was covered under a lifetime warranty with proof of purchase (electronic online receipt) was all that was needed.

The required part was received in less than 1 week and took only 5 minutes to replace. The customer service person could not have been more helpful. Also, during the repair I also realized that how solid and heavy every part is that was used in this construction.

Like most faucets were constructed 50 years ago.

It is well made and easy to install would be better if side sprayer hooked up with threaded connection instead of plastic clip a connection.

my neighbor has one just like it & recommended it to me. So much better than the off-brand (same price) i installed earlier in the year & was already having major issues. Go with the generic green beans, but stick with the brands you know for stuff u want to last!.

Love this faucet. Packed well and will look great in my Victorian kitchen. Only thing that needs to be replaced without sending the whole thing back is the hot and cold buttons. For some reason they were scratched but I’ll contact the company and see if they can send me some new ones.

Everything else is scratch free. A beautiful heavy duty piece.

Absolutely gorgeous piece! This fits my porcelain sink perfectly. I especially love the weight of the sprayer, usually the sprayers feels really fragile but this one feels like it will last a while. Everything that I needed to install this came in the box, which was also greatly appreciated.

I love how well this faucet works – one finger movement on / off ease. The quality is excellent with all metal composition. I paid more for a similar Delta faucet some years ago but have found this Kingston product to be superior in every way.

Excellent, made my sink look grate, also you gonna need the hoses that connects your water. the cold and hot , Its not included, the side rinse hose its easy to install. Just snap in place , 12″on top 3/8 bottom nut tread.

Faucet leaks when the cold water side is closed all the way , clip to hold sprayer hose was broke , lucky i had an extra . No directions . Dont buy used junk