14 Best Drywall Anchors For Tv Mount (2023 Updated)

Pop toggles work with various diameter sheet metal screws. Ideal for anchoring into hollow base materials such as drywall, and will also hold strong in solid materials such as wood studs, concrete or block.

The anchor is corrosion resistant and a pre-drilled hole is required.

The SNAPTOGGLE anchor is a heavy-duty hollow wall anchor for use in walls, ceilings, or floors of materials such as gypsum board, drywall with a wood or steel stud, concrete block, tile over drywall, wood, etc.

The anchor is pre-assembled and ready for immediate use. The ratcheting strap / locking cap assembly positions the strong one-piece zincplated;(or stainless) steel anchoring channel on the rear of the wall, capturing it snugly and securely between the anchoring channel and the cap.

The remaining portion of the straps on the outside of the wall are then easily and quickly snapped off by hand at the required length, flush with the surface of the wall (no extra tools required). Holding is dependent only on a metal bolt to metal channel connection.

TOGGLER ALLIGATOR solid-wall anchors are the only anchors that extrude to the entire length of a screw. AF6 Toggler Alligator solid-wall anchors are designed to work with a 1/4″ drill bit. The tensile strength has been rated at 2,633 lbs.

in 4,000 psi concrete and 69 lbs. in 1/2″ drywall.

Toggler 11010 3/8″-1/2″ Hollow Wall Anchors, 100/Box Our third generation of TOGGLER hollow-wall anchors provide vibration-proof anchoring of;light to medium loads in hollow walls & ceilings They hold securely when they encounter an unexpected solid, such as a wooden stud, or when performing as wedge anchors in materials with thicknesses above their normal wall grip range.

New patented improvements in the original design;have increased holding strength and abuse resistance. Holding arms have been thickened and strengthened without increasing insertion hole size major stress points have been significantly reinforced without increasing anchor size.

Toggle bolts are anchors for use in hollow wall or hollow block. The wing spreads the force over a larger load bearing surface. Toggle bolts are single-use anchors.

WallClaw Anchors are a hammer-in drywall anchor designed for use in both 1/2 inch (90 lbs) and 5/8 inch (125 lbs) drywall. No drilling is required. Simply hammer it in like a nail attach the fixture to be mounted to the wall and fasten.

It is the fastest easiest and among the strongest anchors available on the market. The WallClaw Anchor has a finish nail starter and a blade-like body that easily penetrates drywall with minimal damage to the wall.

This means the holding strength of the anchor in the drywall is greater. The anchor’s wide platform fins near the head provide greater load bearing capacity. WallClaw anchors are made of engineered nylon.

Please pay with STRIPE. Our prefered payment provider. The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8″ to 3-5/8″ thick including gypsum board, drywall, and concrete block, and is made in USA.

The anchor requires a 3/16″-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2″. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes.

The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors. – The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2″ drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material.

Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

SpecificationsUltimate Tensile and Shear Strength ValuesMediaDrill Diameter – Bolt Description – Ultimate Tensile Strength Values – Ultimate Shear Strength Values1/2″ Drywall1/2″3/16″-24 UNC zinc-plated steel238 lb.

247 lb. 5/8″ Drywall1/2″3/16″-24 UNC zinc-plated steel356 lb. 298 lb. 1/2″ Drywall with 25 Gauge Stud*1/2″3/16″-24 UNC zinc-plated steel.

Strongest and most secure of all hollow wall anchors. Holds up to two times more than wing toggles of the same bolt diameter. Excellent for use in ceilings. The anchors solid metal channel centers the bolt in the hole and prevents it from damaging the wall or ceiling.

Great for hanging flat panel TVs, window treatments such as curtains, drape sand blinds. Perfect option for fixing toilet seats to BTW toilets and much more. Also available in stainless steel. Made in the USA.

Easy, secure, vibration-proof anchoring for medium loads. Third-generation design provides increased holding strength and abuse resistance. Vibration and shock proof – won’t damage walls or ceiling. Install in only a small 5/16″ hole.

Metal channel will not fall behind wall – anchor is reusable and works in walls or ceilings 38-in to 3-58-in thick. Great for hanging flat screen TVs grab bars hand rails cabinets and much more. Holds up to 1080 lbs in concrete block and up to 265 lbs in 12-in drywall Industry standards recommend 14 of this ultimate load per anchor.

Requires a 12-in drill bit. Package contains 30 anchors and 30 bolts.

A variety of sizes to suit your needs Comes in a handy reusable plastic container 104 piece per pack KIT INCLUDES: 27 – Slotted / Phillips Tapping Screws #6 x 1″, 27 – Anchors #4-6 x 1″ BLUE, 7 – Slotted / Phillips Tapping Screws #10 x 1-1/4″, 7 – Anchors #8-10 x 1-1/4″ YELLOW, 3 – Slotted / Phillips Tapping Screws #10 x 1-1/2″, 3 – Anchors #10-14 x 1-1/2″ GRAY, 15 – Slotted / Phillips Tapping Screws #8 x 1-1/4″, 15 – Anchors #6-8 x 1-1/4″ RED Great kit for the home or workplace.

Contains an assortment of sizes screws and anchors. A variety of sizes to suit your needs. KIT INCLUDES: 27 – Slotted / Phillips Tapping Screws #6 x 1″, 27 – Anchors #4-6 x 1″ BLUE, 7 – Slotted / Phillips Tapping Screws #10 x 1-1/4″, 7 – Anchors #8-10 x 1-1/4″ YELLOW, 3 – Slotted / Phillips Tapping Screws #10 x 1-1/2″, 3 – Anchors #10-14 x 1-1/2″ GRAY, 15 – Slotted / Phillips Tapping Screws #8 x 1-1/4″, 15 – Anchors #6-8 x 1-1/4″ RED.

Pop toggles work with various diameter sheet metal screws. They are ideal for anchoring into hollow base materials such as drywall. They are ideal for hanging electrical fixtures, drapery supports, bathroom/kitchen accessories, pictures, mirrors, and more.

Pop toggles also hold strong in solid materials such as wood studs, concrete or block. The anchor is corrosion resistant, and a pre-drilled hole is required. These toggles are suited for indoor applications.

Includes six (6) 3/8 in. anchors with matching combination-drive screws. Featured anchors measure 1-1/4 in. long. Maximum working load for 3/8 in. drywall is 60 lbs. Durable construction for lasting performance Ideal for use with drywall, plaster, and tile Includes 6 anchors with combination-drive screws For drywall, plaster, and tile Holds strong even if solid material is hit Not recommended for ceiling applications Use with stainless or brass screws in wet climates When anchor is flush, use provided pin to expand anchor behind drywall For vibration and shock loads, reduce working load by a safety factor of 4 6 anchors per package Learn more about drywall anchors here.

Using their uniquely patented designed slim gripping wings, Gripit Fixings fold out in the gap behind the plasterboard to create one of the most effective and secure fixings on the market today. Ideal for DIY & Trade – hang curtain rails, book shelves and kitchen/bathroom units, to radiators, boilers and wall mounted TV’s.

Traditional plasterboard fixings, although initially secure often fail over time. Gripit fixings are unique plasterboard fixings, manufactured in the UK, that provide the perfect solution to this enduring problem.

They are easy to position and fit, and provide a strong, secure fixing for most wall-mounted items. The design spreads the load over twice the diameter of the fixing ensuring the even distribution of any stresses over a wide area.

Suitable for use in 9. 5 to 15mm thick plasterboard, Gripit fixings are easy to fit. Mark the location, drill the hole using the recommended size flat bit and tap in the Gripit. Push in the insert with a screwdriver and a simple twist spreads the Gripit wings behind the board; job done.

Gripit fixings are reusable: simply turn wing screws to release and remove. If you are unfortunate enough to encounter double thickness plasterboard or dot and dab adhesive, the Gripit Undercutting Tool accessory creates a recess for the wings to rotate into place.

As seen on the UK BBC’s Dragons’ Den television programme! – The plasterboard fixing that allows you to safely hang items up.

TOGGLER ALLIGATOR solid-wall anchors are the only anchors that extrude to the entire length of a screw. AF8 Toggler Alligator solid-wall anchors are designed to work with a 5/16″ drill bit. The tensile strength has been rated at 3,083 lbs.

in 4,000 psi concrete and 85 lbs. in 1/2″ drywall.